Bently Nevada 330707-00-20-90-11-00 with FluidLoc Cable & Protector

Get maximum protection with the Bently Nevada 330707-00-20-90-11-00. This 11mm proximity probe has a 9-meter FluidLoc cable. The cable fights oil and chemicals. It also includes a connector protector. This probe gives accurate vibration data. It is essential for predictive maintenance. Trust this USA-made sensor for your critical machines.

Product Specifications at a Glance

• Manufacturer: Bently Nevada
• Series & Type: 3300 XL, 11mm Proximity Probe
• Complete Model Code: 330707-00-20-90-11-00
• Case Thread: 5/8-18 UNF
• Case Length: 2.0 inches (50.8 mm)
• Cable Length: 9.0 meters (29.5 feet)
• Cable Type: FluidLoc (Oil-Resistant)
• Connector: ClickLoc with Protective Cover
• Probe Tip: Durable PPS Plastic
• Probe Body: 304 Stainless Steel
• Operating Temp: -51°C to +177°C
• Electrical Resistance (9m): 8.5 Ω ± 1.1 Ω
• Cable Impedance: 75 Ohms, Triaxial
• Seal Type: Internal Viton O-ring
• Min Cable Bend: 1.0 inch (25.4 mm)
• Torque (Rec./Max): 15.2 N•m / 45.2 N•m
• Connector Torque: Hand-tight only

Decoding the Model: 330707-00-20-90-11-00

• » 330707 – Identifies the core 11mm probe design.
• » -00 – First suffix: Zero unthreaded length on the shaft.
• » -20 – Second suffix: Case is 2.0 inches long.
• » -90 – Third suffix: Features a long 9.0 meter cable.
• » -11 – Fourth suffix: FluidLoc cable + Connector Protector.
• » -00 – Fifth suffix: No agency approvals specified.

Setup and Best Practices

• Mount in a clean, dry hole if possible.
• Use a torque wrench. Aim for 15.2 N•m on the case.
• Hand-tighten the connector. The protector shields it from damage.
• Route the FluidLoc cable away from sharp edges and heat sources.

Ordering & Support Details

• Perfect for Bently Nevada 3300/3500 monitoring systems.
• The 330707-00-20-90-11-00 is built for harsh, oily conditions.
• Fast dispatch via FedEx, UPS, or DHL.
• Backed by a straightforward 12-month warranty for peace of mind.

Common Technical Questions

What are the benefits of both FluidLoc cable and a connector protector?

You get double protection. The cable resists fluids. The protector guards the connector from physical impact and contamination during installation and use.

Is the 2.0-inch case length a standard size?

Yes, a 2-inch case is a common and versatile length. It fits many standard mounting holes in turbines, pumps, and fans.

What is the weight of this probe for shipping purposes?

The shipping weight is approximately 0.17 kilograms. This is for the probe and its 9-meter cable.

Can this probe handle high-pressure environments?

It has a Viton O-ring seal for pressure differentials. For confirmed high-pressure use, contact us for custom testing options.

What does the "00" for agency approvals mean for my application?

It means this specific probe variant does not carry special certifications (like ATEX or CSA). It is for general industrial use in non-hazardous areas.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825