Bently Nevada Long-Distance Probe with Certified Protection

Monitor remote machinery with the Bently Nevada 330707-00-24-90-01-05. This sensor offers an extensive 9-meter reach. It includes a protective shroud around the ClickLoc connector. This guard helps prevent physical damage during handling. The probe meets multiple international safety standards. Its body is made from durable 304 stainless steel. The tip uses rugged PPS plastic for long service life. This model is ideal for certified plants needing long cable runs. Ensure reliable data from hard-to-access measurement points.

Part Number Explanation: 330707-00-24-90-01-05

• Core Identifier (330707):
  • Platform: 3300 XL Monitoring.
  • Probe Type: 11mm Proximity Sensor.
  • Mounting: 5/8-18 UNF, No Armor.
• Position 1 (-00): Unthreaded Length: 0.0 inch.
• Position 2 (-24): Case Length: 2.4 inches.
• Position 3 (-90): Cable Length: 9.0 meters (29.5 ft).
• Position 4 (-01): Connector: ClickLoc with Protector, Standard Cable.
• Position 5 (-05): Approvals: Multiple Agency Certifications.

Comprehensive Technical Data

• Brand & Model Code: Bently Nevada 330707-00-24-90-01-05
• System: 3300 XL Vibration Analysis
• Sensing Technology: Non-Contact Eddy Current
• Active Diameter: 11.0 mm (0.433 in)
• Housing Material: AISI 304 Stainless Steel
• Tip Material: Polyphenylene Sulfide (PPS) Polymer
• Cable Specification: 75 Ohm Triaxial
• Cable Type: Standard FEP Insulated
• Connector Feature: Integrated Plastic Protective Shroud
• Total Extended Length: 9.0 Meters (29.5 Feet)
• DC Resistance Value (9m): 8.5 Ohms
• Tolerance Band: ± 1.1 Ohms (7.4 to 9.6 Ω)
• Mounting Thread: 5/8-18 UNF (Primary)
• Compatible Thread 1: M16 x 1.5 mm
• Compatible Thread 2: M14 x 1.5 mm
• Maximum Engagement (5/8-18): 0.938 Inch
• Recommended Tightening Torque: 15.2 N·m (133 in-lb)
• Torque Limit (Never Exceed): 45.2 N·m (400 in-lb)
• Electrical Connection: ClickLock Coaxial Connector
• Connector Installation Torque: Hand Tight Only
• Minimum Cable Bend Radius: 25.4 mm (1.0 inch)
• Full Operating Range: -51°C to +177°C
• Seal Type: Factory-Installed Viton O-Ring
• Pre-Installation Advisory: Keep above -34°C (-29°F)
• Unit Shipping Weight: Approximately 0.17 kg

Installation & Handling Guide

• This 9-meter probe requires a matching 9-meter Proximitor sensor.
• Plan the long cable route carefully to avoid snags and damage.
• The connector shroud protects against impacts in crowded panels.
• Clean the mounting hole and verify thread condition.
• Start threading the probe by hand to ensure proper alignment.
• Final tighten with a torque wrench to the specified 15.2 N·m.
• Push the protected ClickLoc connector firmly until it clicks into place.
• Allow the probe to acclimatize if it has been in cold storage.

Compatibility Notes

This Bently Nevada 330707 probe is designed for integration with Bently Nevada 3300 XL systems. Its certified design makes it suitable for use in facilities requiring approved equipment for safety or regulatory compliance.

Our Warranty Promise

We offer a solid 12-month product warranty. This warranty protects you against any material or workmanship issues for one year from the date of purchase.

Shipping Options

We deliver quickly and reliably across the globe. Our shipping partners are FedEx, UPS, and DHL. You will receive detailed tracking information for your order.

Professional FAQs

What certifications are included with the "-05" approval option?

This typically includes major marks like CE (Conformité Européenne) for the European market, indicating compliance with EU safety, health, and environmental requirements.

Why is a connector protector important for a long cable?

Long cables often get pulled or snagged during installation or maintenance. The protector shields the delicate electrical connector from strain and impact damage.

Can this probe be used in outdoor applications?

The standard cable is not specifically sealed for continuous outdoor exposure. For outdoor use, a model with a FluidLoc cable (suffix -11 or -12) would be more appropriate.

How should I store the 9-meter cable before installation?

Loop it loosely in large coils (at least 24 inches in diameter). Do not hang it by the cable or allow it to be kinked.

What is the system setup process for this long-cable probe?

You must use it with a matching 9-meter Proximitor. The system monitor must be configured with the correct scale factor for an 11mm probe. Always follow the monitor's setup procedure.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825