{"product_id":"bently-nevada-330707-00-24-90-11-05-9m-fluidloc-probe","title":"Bently Nevada 330707-00-24-90-11-05 | 9m FluidLoc Probe","description":"\u003ch2\u003e\u003cstrong\u003eBently Nevada Long-Reach Protected Probe for Demanding Installations\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330707-00-24-90-11-05\u003c\/strong\u003e is engineered for tough, remote monitoring. It combines a long 9-meter FluidLoc cable with a connector protector. This setup resists moisture and physical damage. The probe has a standard 2.4-inch stainless steel case. Its PPS tip ensures reliable sensing in harsh conditions. This model carries multiple international safety approvals. It is the ideal solution for large machinery in wet or dirty environments.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eDecoding the Part Number: 330707-00-24-90-11-05\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Family [330707]:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e3300 XL Machinery Protection Series.\u003c\/li\u003e\n\u003cli\u003e11mm Eddy-Current Displacement Probe.\u003c\/li\u003e\n\u003cli\u003eStandard 5\/8-18 UNF Thread.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature -00:\u003c\/strong\u003e Unthreaded Section: 0.0 inch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature -24:\u003c\/strong\u003e Case Overall Length: 2.4 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature -90:\u003c\/strong\u003e Cable Length: 9.0 meters (29.5 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature -11:\u003c\/strong\u003e Connection: ClickLoc with Protector \u0026amp; FluidLoc Cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeature -05:\u003c\/strong\u003e Compliance: Multiple Agency Certifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eComprehensive Technical Parameters\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal Manufacturer:\u003c\/strong\u003e Bently Nevada\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Part Number:\u003c\/strong\u003e \u003cstrong\u003e330707-00-24-90-11-05\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring Platform:\u003c\/strong\u003e 3300 XL Vibration System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMeasurement Method:\u003c\/strong\u003e Non-Contact Eddy Current\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Diameter:\u003c\/strong\u003e 11.0 Millimeters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Body Material:\u003c\/strong\u003e Grade 304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensing Tip Material:\u003c\/strong\u003e High-Strength PPS Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e 75 Ohm Triaxial, FEP Jacketed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Technology:\u003c\/strong\u003e FluidLoc Moisture-Wick Barrier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Protection:\u003c\/strong\u003e Integrated Plastic Shroud\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Extended Length:\u003c\/strong\u003e 9.0 Meters (29.5 Feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal DC Resistance (9m):\u003c\/strong\u003e 8.5 Ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcceptable Resistance Range:\u003c\/strong\u003e 7.4 to 9.6 Ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Mounting Thread:\u003c\/strong\u003e 5\/8-18 UNF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternative Fit 1:\u003c\/strong\u003e M16 x 1.5 mm Thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternative Fit 2:\u003c\/strong\u003e M14 x 1.5 mm Thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Thread Engagement:\u003c\/strong\u003e 0.938 Inch (5\/8-18)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrect Installation Torque:\u003c\/strong\u003e 15.2 Newton-Meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsolute Torque Limit:\u003c\/strong\u003e 45.2 Newton-Meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Connector Style:\u003c\/strong\u003e ClickLock Coaxial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Torque Spec:\u003c\/strong\u003e Hand Tight Only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -51°C to +177°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Seal Type:\u003c\/strong\u003e Factory-Installed Viton O-Ring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Installation Warning:\u003c\/strong\u003e Do not expose below -34°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight per Unit:\u003c\/strong\u003e 0.17 Kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Installation Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlan a safe route for the full 9-meter cable length.\u003c\/li\u003e\n\u003cli\u003eUse wide, gentle loops for any excess cable. Avoid tight coils.\u003c\/li\u003e\n\u003cli\u003eProtect the cable from sharp edges and high heat sources.\u003c\/li\u003e\n\u003cli\u003eEnsure the mounting hole is clean and threads are undamaged.\u003c\/li\u003e\n\u003cli\u003eTighten the probe to the specified 15.2 N·m torque.\u003c\/li\u003e\n\u003cli\u003eConnect the cable: push firmly until the ClickLoc mechanism engages.\u003c\/li\u003e\n\u003cli\u003eThe connector shroud protects against accidental impacts.\u003c\/li\u003e\n\u003cli\u003eAllow the probe to warm up if stored in a cold environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSystem Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis long-cable \u003cstrong\u003eBently Nevada 330707\u003c\/strong\u003e probe must pair with a matching 9-meter Proximitor sensor in a 3300 XL system. The FluidLoc feature is ideal for outdoor or damp indoor applications.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWarranty Promise\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eYour purchase is protected by our \u003cstrong\u003e12-month warranty\u003c\/strong\u003e. This guarantee covers any failures due to original manufacturing defects for one full year.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eGlobal Shipping Partners\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eWe deliver worldwide with reliable services. We use \u003cstrong\u003eFedEx, UPS, and DHL\u003c\/strong\u003e for all international shipments. You will receive full tracking details.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eExpert FAQs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is the DC resistance higher for this 9-meter model?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe longer cable inherently has more electrical resistance. The 8.5-ohm value (range 7.4-9.6 Ω) is normal and calibrated for in the system design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat environments is the \"-11\" option designed for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOption \"-11\" is for harsh, wet, or dirty sites needing long cable runs. Examples include outdoor turbines, pulp \u0026amp; paper mills, or wastewater treatment plants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I shorten the 9-meter cable if it's too long?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The cable is a fixed, sealed part of the probe assembly. Cutting it will destroy the probe and void the warranty. Order the correct length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and handle the long FluidLoc cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStore it loosely coiled in large loops (over 24-inch diameter). Avoid kinks, crushing, or exposure to sharp objects that could pierce the jacket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the connector protector affect mating with the proximitor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The shroud fits around the standard ClickLoc connector. It does not interfere with the electrical connection. The connector still clicks into place normally.\u003c\/p\u003e\n\u003cp\u003e© 2026 Ubest Automation Limited. All rights reserved.\u003cbr\u003eOriginal Source: \u003ca href=\"https:\/\/www.ubestplc.com\/\"\u003ehttps:\/\/www.ubestplc.com\/\u003c\/a\u003e\u003cbr\u003eContact: \u003ca href=\"mailto:sales@ubestplc.com\"\u003esales@ubestplc.com\u003c\/a\u003e | Phone: \u003ca href=\"https:\/\/wa.me\/8618030005825\"\u003e+86 180 3000 5825\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51548123693338,"sku":"330707-00-24-90-11-05","price":298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0873\/6240\/4634\/files\/3307073_2.jpg?v=1782874924","url":"https:\/\/www.ubestplc.com\/products\/bently-nevada-330707-00-24-90-11-05-9m-fluidloc-probe","provider":"Ubest Automation Limited","version":"1.0","type":"link"}