Bently Nevada 330709-000-060-50-12-00 FluidLoc Probe
UBEST – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Bently Nevada 330709-000-060-50-12-00 Proximity Probe
Meet the Bently Nevada 330709-000-060-50-12-00 proximity probe. This 11mm sensor delivers precise vibration data. It features a special FluidLoc cable for tough conditions. Perfect for protecting your heavy machinery. Get reliable monitoring with this durable probe.
Key Features of Model 330709-000-060-50-12-00
- Series: 3300 XL Vibration Monitoring
- Probe Size: 11 mm Diameter
- Thread Type: M16 x 1.5
- Case Length: 60 mm
- Cable Length: 5.0 meters with FluidLoc protection
- Connector: Miniature coaxial ClickLoc
Complete Model Number Breakdown
- 330709 - 3300 XL 11mm Probe
- 000 - 0 mm Unthreaded Length
- 060 - 60 mm Case Length
- 50 - 5.0 meter Cable
- 12 - ClickLoc with FluidLoc Cable
- 00 - No Agency Approvals
Technical Specifications
- DC Resistance: 7.2 ± 0.8 ohms
- Minimum Target: 30.5 mm diameter
- Minimum Shaft: 152 mm diameter
- Tip Material: PPS Plastic
- Case Material: 304 Stainless Steel
- Temperature Range: -52°C to +177°C
- Warning: Do not use below -34°C
- Case Torque: 63.3 N•m maximum
- Bend Radius: 25.4 mm minimum
Installation Notes
- Use only with 5-meter Proximitor sensors
- Hand-tighten connector only
- Maximum thread engagement: 24 mm
- Avoid sharp cable bends during installation
Shipping & Support
We ship globally via FedEx, UPS, and DHL. Your Bently Nevada 330709-000-060-50-12-00 comes with full technical support. Enjoy peace of mind with our service.
Warranty Information
We provide a solid 12-month warranty on this proximity probe. This covers any manufacturing defects. Contact us for warranty claims.
Frequently Asked Questions
What makes the FluidLoc cable special?
The FluidLoc cable resists oils and chemicals. It works well in wet environments.
Can I use this probe with any monitor?
This probe needs a 5-meter Proximitor sensor. Check your system compatibility first.
What is the probe tip made from?
The tip uses PPS material. This plastic resists wear and chemicals.
How do I install the probe correctly?
Tighten the case to 63.3 N•m. Hand-tighten the connector only.
What is the minimum target size?
You need at least 30.5 mm of target surface. This ensures accurate readings.
© 2026 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825