Bently Nevada 3300 XL Proximity Probe: Premium Vibration Sensing

Complete Product Configuration & Suffix Information

• Brand: Bently Nevada
• Model & Base P/N: 3300 XL 8 mm Proximity Probe - 330103
• Full Part Number: 330103-00-04-05-12-05
• -00: Unthreaded Length = 0 mm
• -04: Overall Case Length = 40 mm
• -05: Total Cable Length = 0.5 meter (1.6 feet)
• -12: Connector/Cable = Miniature coaxial ClickLoc with FluidLoc
• -05: Agency Approvals = CSA, ATEX, IECEx

Core Technical Specifications

• Linear Measurement Range: 0.25 to 2.3 mm (10 to 90 mils).
• Recommended Gap Setting: 1.27 mm (50 mils) for approximately -9 Vdc output.
• Nominal Probe Resistance (0.5m cable): 7.45 Ω ± 0.50.
• Frequency Response: Signal depends on cable length; see manual for roll-off graphs.
• Probe Tip Material: Durable Polyphenylene Sulfide (PPS).
• Probe Case Material: Corrosion-resistant AISI 303/304 Stainless Steel.
• Case Thread: M10 x 1 mm.
• Sealing: Viton® O-ring for internal pressure differential sealing.

Environmental & Operational Ratings

• Operating Temperature: Standard range from -52°C to +177°C (-62°F to +350°F).
• Extended Cable/Connector Temp: Up to +260°C (+500°F).
• Humidity Resistance: Less than 3% ASF change at 93% humidity per IEC 68-2-3.
• Intrinsic Safety (Option -05): AEx/Ex ia IIC T5-T1 Ga for Zone 0/Division 1.
• Non-incendive (Option -05): AEx/Ex nA/ec IIC T5-T1 Gc for Zone 2/Division 2.

Frequently Asked Questions (FAQ)

• Q: What is the standard output voltage range?
  A: The linear output is approximately -1 to -17 Vdc over the 0.25 to 2.3 mm gap.
• Q: Is this probe pressure tested?
  A: No, probes ship without pressure testing. Contact Bently Nevada's custom department for tested units.
• Q: Can I use this with any 3300 XL monitor?
  A: Yes, this 8 mm 3300 XL probe is fully compatible with the 3300 XL proximitor monitoring system.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com Phone: +86 180 3000 5825