Bently Nevada 9200-03 Low Frequency Velocity Transducer

This two-wire seismoprobe detects low frequency vibrations from 4.5 Hz. It features simple terminal block connections and rugged construction. The transducer provides reliable machinery protection in tough industrial environments.

Product Configuration Details

• Base Unit: 9200 Two-Wire Transducer
• Full Part Code: 9200-03-05-05-00
• Mounting Angle: 90 ±2.5 degrees
• Frequency Response: 4.5 Hz minimum
• Connection Type: Terminal block top mount
• Mounting Style: No base with 1/2-20 UNF stud
• Certification: No special approvals needed

Key Product Advantages

• Very low 4.5 Hz frequency detection
• Simple two-wire installation system
• Terminal block for easy wiring
• 1/2-20 UNF stud for secure mounting
• 20 mV/mm/s sensitivity rating
• Dust and moisture resistant design
• Wide temperature operation range
• Lightweight aluminum construction

Technical Performance Data

• Velocity sensitivity: 20 mV/mm/s ±5%
• Frequency range: 4.5 Hz to 2000 Hz
• Maximum displacement: 2.54 mm peak
• Velocity range: 25 mm/s at 100 Hz
• Coil resistance: 1.25 kΩ ±5%
• Coil inductance: 125 mH typical
• Operating temperature: -29°C to +121°C
• Extended temperature: -29°C to +204°C
• Load impedance: 10 kΩ recommended
• Temperature effect: 0.2%/°C
• Humidity tolerance: 95% non-condensing

Physical Specifications

• Overall height: 102 mm typical
• Body diameter: 41 mm standard
• Unit weight: 300 grams complete
• Housing material: Anodized aluminum
• Sealing material: Neoprene gasket
• Mounting thread: 1/2-20 UNF stud

Shipping & Warranty

• Fast shipping via FedEx, UPS, DHL
• Real-time tracking provided
• 12 month factory warranty
• New condition in original box

Expert Questions & Answers

• What applications need 4.5 Hz low frequency response?
• Slow rotating equipment like large fans, pumps, and gearboxes need this low frequency capability.
• How does terminal block mounting help installation?
• Terminal blocks allow direct wire connections without special connectors or tools.
• What is the advantage of 1/2-20 UNF stud mounting?
• This larger stud provides stronger mounting for high vibration environments.
• Can this transducer monitor very slow machinery?
• Yes, the 4.5 Hz minimum frequency works with equipment as slow as 270 RPM.
• What maintenance does this transducer need?
• Just periodic visual inspection and connection checks are required normally.

Contact: sales@ubestplc.com | +86 18030005825

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Partners: Powergear X Automation Limited