CI871K01 ABB Profinet I/O Interface Kit

Description

CI871K01 Package including: - CI871, Communication Interface - TP867, Baseplate

The CI871 module facilitates the connection of an AC 800M controller to PROFINET IO devices. It features a robust and efficient design that ensures reliable communication with PROFINET IO protocol through Ethernet at a speed of 100 Mbps. The module is mounted on the TP867 baseplate, which includes two RJ45 Ethernet connectors. The CH1 connector supports both 10 Mbps and 100 Mbps, whereas the CH2 connector supports only 10 Mbps. The CI871 also includes a code lock to prevent incorrect unit installation onto the TP867 baseplate.

Key Features

• Ethernet Port: Provides one 10/100 Mbps fast Ethernet port for PROFINET IO (RJ45 connector on the TP867 baseplate).
• Simple Installation: Simple DIN-rail mounting.
• Communication: Supports communication with PROFINET IO protocol through Ethernet with a speed of 100 Mbps.
• Code Lock: Preset two-letter Alpha code locking device installed in the unit base, which prevents mounting of incompatible components.
• Hot Swap: Supports hot swap, allowing for easy replacement without shutting down the system.

Technical Specifications

• Type: Ethernet unit
• Protocol: PROFINET IO
• Communication Speed: CH1 10 Mbps / 100 Mbps defined in IEEE 802.3u 10/100 Base-Tx
• Connectors: RJ45
• Current Consumption (from CEX-Bus 24VDC): 160 mA typical (250 mA max)
• Power Dissipation: 3.8 W typical (6 W max)
• Protection Rating: IP20 according to EN60529, IEC 529
• Weight: 500 g (700 g with package, package CI871K01 with CI871 and TP867)
• Dimensions: W 59 x H 185 x D 127.5 mm (W 2.9 x H 7.3 x D 5.0 in)

Indicators

There are six LED indicators on the front panel of CI871 to show various states and conditions:

• Fault (Red): Indicates a fault condition on CI871.
• Run (Green): Indicates that the CI871 is operational.
• RxTx1 (Yellow): Indicates receiving/transmitting telegram at CH1.
• RxTx2 (Yellow): Indicates receiving/transmitting telegram at CH2.
• Primary (Yellow): Indicates if the module is active.
• Dual: This LED is always OFF as redundancy is not supported.

Installation

The CI871 unit is powered from the processor unit via the CEX-Bus and does not require any additional external power source. The installation involves mounting the unit on a DIN-rail and connecting the Ethernet cables to the appropriate connectors.