Features:

1. PLC Programming and Configuration Services:

   • Full support for programming and configuring the PLC system.

2. Data Exchange:

   • Periodic data exchange using Ethernet Global Data (EGD).
   • EGD Commands to read and write PLC and EGD exchange memory over the network.

3. TCP/IP Communication:

   • Services using SRTP (Secure Real-Time Transport Protocol).
   • Support for SRTP Client with channels.

4. Remote Monitoring:

   • Basic remote monitoring of PLC from a web browser.

5. Station Management:

   • Comprehensive station management and diagnostic tools.

6. Ethernet Connectivity:

   • Extended connectivity via IEEE 802.3 CSMA/CD 10Mbps and 100Mbps Ethernet LAN port connectors.
   • Network switch with auto negotiate, sense, speed, and crossover detection.
   • Direct connection to BaseT network switch, hub, or repeater without an external transceiver.

7. Flash Memory Upgrade:

   • Protocol stored in flash memory in the Ethernet interface, easily upgradeable through the CPU serial port.

8. Communication with Remote Nodes:

   • Communication with remote PLCs and other nodes reachable through routers; gateway IP address configuration required.

9. Internet Access:

   • Internet access via web pages served to standard web browsers.

Specifications:

• Ethernet Processor Speed:

  • 200 MHz

• Connectors:

  • Station Manager (RS-232) Port: 9-pin female D-connector.
  • Two 10BaseT / 100BaseTX Ports: 8-pin female shielded RJ-45.

• LAN:

  • IEEE 802.2 Logical Link Control Class I, IEEE 802.3 CSMA/CD Medium Access Control 10/100 Mbps.

• Number of IP Addresses:

  • One.

• Number of Ethernet Port Connectors:

  • Two, both are 10BaseT / 100BaseTX with auto-sensing RJ-45 connection.

• Embedded Ethernet Switch

  • Yes – Allows daisy chaining of Ethernet nodes.

• Serial Port

  • Station Manager Port (RS-232 DCE), supports baud rates from 1200 to 115200 bps.

• Programmer Compatibility:

  • Machine Edition Logic Developer software version 5.0, SP3, Logic Developer PLC HotFix 3.
  • VersaPro programming software can be used for configuration, supporting Release 11.0 features.