Bently Nevada 330101-29-52-10-02-00 Proximity Probe Overview

Engineers design the Bently Nevada 330101-29-52-10-02-00 probe to monitor shaft vibration and position in industrial machinery continuously. This heavy-duty eddy current sensor delivers precise displacement readings under severe thermal and mechanical site conditions.

Pyramid Information Structure:

• Core Identity: Premium industrial proximity sensor for non-contact shaft measurement.
• Mechanical Architecture:
  • Rugged PPS tip material with patented TipLoc secure locking structure.
  • Stainless steel threaded housing featuring CableLoc 330 N retention design.
  • Integral ClickLoc miniature coaxial connector without external protective armor.
• Performance Capabilities:
  • Broad linear measuring range with precise voltage scale factors.
  • Wide environmental operating temperatures and internal fluid sealing options.

Product Identification & Model Breakdown

• Model: 330101-29-52-10-02-00
• Series: Bently Nevada 3300 XL 8 mm System
• Manufacturer: Ubest Automation Limited
• Ordering Code Structure:
  • 330101 — 3300 XL 8 mm Probe with 3/8-24 UNF Thread
  • 29 — Unthreaded Case Length: 2.9 inches
  • 52 — Overall Case Length: 5.2 inches
  • 10 — Total Length: 1.0 meter (3.3 feet)
  • 02 — Miniature Coaxial ClickLoc Connector, Standard Cable
  • 00 — Agency Approval Option: Not Required

Summary

• The Bently Nevada 330101-29-52-10-02-00 proximity probe delivers dependable dynamic vibration and static position signals for critical rotating assets.
• Its rugged PPS molded tip and stainless steel case resist extreme mechanical stress, thermal expansion, and harsh operating fluids.

Technical Specifications

• Brand: Bently Nevada
• Model Number: 330101-29-52-10-02-00
• Measurement Range: 2.0 mm (80 mils) linear scope starting at 0.25 mm (10 mils) gap
• Sensitivity (ISF): 7.87 V/mm (200 mV/mil) ±5% for standard 1-meter dynamic field systems
• Linearity (DSL): Less than ±0.025 mm (±1 mil) deviation across standard thermal range
• Target Gap Setting: -9 Vdc nominal bias setting at approximately 1.27 mm (50 mils) separation
• Resistance: Center to outer conductor resistance evaluates to 7.59 ± 0.50 Ohms per meter
• Capacitance: Cable capacitance rates typically at 69.9 pF per meter length
• Temperature Scope: Standard probe operates continuously between -52°C and +177°C ambient environments
• Environmental Resistance: Sensor tip withstands 93% relative humidity with less than 3% scale factor shift
• Case Pressure Rating: Viton O-ring seals differential pressure between molded tip and stainless steel housing

Installation Guidelines

• Mount the sensor housing firmly into a 3/8-24 UNF tapped hole using proper hand tools.
• Torque the standard probe case up to 11.2 N•m (100 in•lbf) for safe and reliable thread engagement.
• Limit initial thread insertion torque to 7.5 N•m (66 in•lbf) during initial positioning adjustments.
• Keep total thread engagement depth below the maximum structural limit of 0.563 inches.
• Connect the 1.0-meter probe cable directly to matching extension cables with ClickLoc miniature connectors.
• Route field wiring using 3-conductor shielded triad cable up to 305 meters maximum distance.

Package Contents & Delivery

• One Bently Nevada 3300 XL 8 mm proximity probe assembly
• Integrated 1.0-meter standard coaxial cable with ClickLoc connector
• Protective connector cap for storage and handling safety
• Fast international express shipping options via FedEx, UPS, and DHL service networks

Frequently Asked Questions

• What gap setting should technicians use for radial vibration tracking?
  Set the nominal gap voltage to -9 Vdc, which corresponds to roughly 1.27 mm (50 mils) physical distance.
• How does the physical design prevent internal cable fluid leakage?
  Engineers specify optional FluidLoc cable constructions to block liquid migration through interior wire strands.
• What cable gauge works best for long field wiring runs?
  Select 0.2 to 1.5 mm2 (16 to 24 AWG) shielded triad wire for clean signal delivery.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.

Contact: sales@ubestplc.com | +86 180 3000 5825