Phoenix Contact | QUINT-PS/1AC/24DC/20 Power Supply Unit
UBEST – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Phoenix Contact Model QUINT-PS/1AC/24DC/20 Power Supply Unit
Technical Specifications
Dimensions
| Width with Alternative Assembly | 122 mm |
| Height with Alternative Assembly | 130 mm |
| Depth with Alternative Assembly | 93 mm |
Ambient Conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K) |
| Ambient Temperature (Start-up Type Tested) | -40 °C |
| Ambient Temperature (Storage/Transport) | -40 °C ... 85 °C |
| Max. Permissible Relative Humidity (Operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Climatic Class | 3K3 (in acc. with EN 60721) |
| Degree of Pollution | 2 |
| Installation Height | 6000 m |
Input Data
| Nominal Input Voltage Range | 100 V AC ... 240 V AC |
| Input Voltage Range | 85 V AC ... 264 V AC / 90 V DC ... 350 V DC |
| Dielectric Strength Maximum | 300 V AC |
| AC Frequency Range | 45 Hz ... 65 Hz |
| Frequency Range DC | 0 Hz |
| Discharge Current to PE | < 3.5 mA |
| Current Consumption |
5.1 A (120 V AC) 2.3 A (230 V AC) 4.9 A (110 V DC) 2.4 A (220 V DC) |
| Nominal Power Consumption | 569 VA |
| Inrush Surge Current | < 20 A |
| Mains Buffering |
> 32 ms (120 V AC) > 32 ms (230 V AC) |
| Input Fuse | 12 A (slow-blow, internal) |
| Choice of Suitable Circuit Breakers | 10 A ... 16 A (AC: Characteristics B, C, D, K) |
| Type of Protection | Transient surge protection |
| Protective Circuit/Component | Varistor |
Output Data
| Nominal Output Voltage | 24 V DC ±1 % |
| Setting Range of the Output Voltage (USet) | 18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted) |
| Nominal Output Current (IN) | 20 A (-25 °C ... 60 °C, UOUT = 24 V DC) |
| POWER BOOST (IBoost) | 26 A (-25°C ... 40°C permanent, UOUT = 24 V DC) |
| Selective Fuse Breaking (ISFB) | 120 A (12 ms) |
| Derating | 60 °C ... 70 °C (2.5%/K) |
| Connection in Parallel | Yes, for redundancy and increased capacity |
| Connection in Series | Yes |
| Feedback Resistance | Max. 35 V DC |
| Protection Against Surge Voltage on the Output | < 35 V DC |
| Control Deviation |
< 1 % (change in load, static 10 % ... 90 %) < 2 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage ±10 %) |
| Residual Ripple | < 30 mVPP (with nominal values) |
| Output Power | 480 W |
| Typical Response Time | < 0.6 s |
| Maximum Power Dissipation in No-Load Condition | 8 W |
| Power Loss Nominal Load Max. | 40 W |
General Information
| Net Weight | 1.7 kg |
| Efficiency | > 93 % (for 230 V AC and nominal values) |
| Insulation Voltage Input/Output |
4 kV AC (type test) 2 kV AC (routine test) |
| Insulation Voltage Input / PE |
3.5 kV AC (type test) 2 kV AC (routine test) |
| Insulation Voltage Output / PE | 500 V DC (routine test) |
| Protection Class | I |
| Degree of Protection | IP20 |
| MTBF (IEC 61709, SN 29500) |
> 900000 h (25 °C) > 520000 h (40 °C) |
| Mounting Position | Horizontal DIN rail NS 35, EN 60715 |
| Assembly Instructions |
Alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically Alignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom |
Connection Data, Input
| Connection Method | Screw connection |
| Conductor Cross Section Solid |
Min. 0.2 mm² Max. 6 mm² |
| Conductor Cross Section Flexible |
Min. 0.2 mm² Max. 4 mm² |
| Conductor Cross Section AWG |
Min. AWG 18 Max. AWG 10 |
| Stripping Length | 7 mm |
| Screw Thread | M4 |
Connection Data, Output
| Connection Method | Screw connection |
| Conductor Cross Section Solid |
Min. 0.2 mm² Max. 6 mm² |
| Conductor Cross Section Flexible |
Min. 0.2 mm² Max. 4 mm² |
| Conductor Cross Section AWG |
Min. AWG 12 Max. AWG 10 |
| Stripping Length | 7 mm |
| Screw Thread | M4 |
Connection Data for Signaling
| Conductor Cross Section Solid |
Min. 0.2 mm² Max. 6 mm² |
| Conductor Cross Section Flexible |
Min. 0.2 mm² Max. 4 mm² |
| Conductor Cross Section AWG |
Min. AWG 18 Max. AWG 10 |
| Screw Thread | M4 |