Schneider Easy Modicon M200 TM200C16R Logic Controller – 16 I/O Relay, 100–240 V AC

The TM200C16R from Schneider Electric belongs to the Easy Modicon M200 controller family. It combines 16 discrete I/O points with relay outputs and a 100–240 V AC supply. Engineers choose this model for compact machines that need fast counting, PID regulation and Modbus communication. The TM200C16R targets OEM panel builders who value simple wiring and predictable relay switching.

Summary

• The TM200C16R offers 8 discrete inputs, including 4 high-speed inputs rated at 100 kHz for HSC mode.
• It provides 7 relay outputs with 2 A current and 4 A maximum current per common terminal.
• The controller runs on 100–240 V AC supply with 51–63 VA power consumption at maximum I/O load.
• It supports up to 4 expansion modules, reaching 64 transistor outputs or 71 relay outputs.
• The unit includes USB, RS485 and RS232/RS485 serial links for programming and Modbus RTU/ASCII.
• Schneider Electric builds this controller to EN/IEC 61131-2 and EN/IEC 61010-2-201 standards.

Technical Specifications

• Brand: Schneider Electric
• Model: TM200C16R
• Series: Easy Modicon M200
• Manufacturer: Schneider Electric
• Product type: Logic controller with 16 discrete I/O
• Rated supply voltage: 100–240 V AC, 50/60 Hz, with 85–264 V limits
• Inrush current: 50 A
• Discrete inputs: 8 total — 1 regular input, 4 fast inputs, 4 high-speed inputs
• Input voltage and current: 24 V DC, 7 mA per input, sink or source type 1
• Input thresholds: state 1 ≥ 15 V; state 0 ≤ 5 V; input impedance 3.3 kΩ
• Discrete outputs: 7 relay outputs, normally open, 2 A rating
• Output voltage: 24 V DC and 220 V AC, with limits of 30 V DC and 250 V AC
• Maximum current per common: 4 A at COM 0 and 4 A at COM 1
• Response time: 10 ms turn-on and turn-off for relay outputs Q0–Q6
• High-speed input response: 5 µs turn-on and turn-off on I0, I1, I6, I7
• Fast input response: 35 µs turn-on and 100 µs turn-off on I2–I5
• Regular input response: 35 µs turn-on and 100 µs turn-off on I8
• Configurable filtering: 0 ms, 3 ms or 12 ms for inputs
• Counting inputs: 4 fast inputs at 100 kHz, 32-bit, in HSC mode
• Control signal types: quadrature x1/x2/x4, pulse/direction, single phase, CW/CCW
• Regulation loop: adjustable PID regulator with up to 14 simultaneous loops
• Execution time: 0.2 µs per Boolean instruction; 0.3 ms per 1 K instructions
• Event task response: 60 µs
• Clock drift: ≤ 90 s per month at 25 °C
• Memory: 512-byte internal flash with 10,000 instructions for program backup
• Data storage: optional 32 GB micro SD card
• Battery: BR2032 Li-CFx, 5-year life, 3-year backup at 25 °C
• Communication ports: USB mini B 2.0; serial 1 RS485; serial 2 RS232/RS485
• Transmission rate: 1.2–115.2 kbit/s for serial links; 12 Mbit/s for USB
• Protocols: Modbus master/slave RTU/ASCII, SoMachine-Network, USB
• Local signalling: LEDs for PWR, RUN, ERR, SD, BAT, SL1 and per-channel I/O state
• Sensor power supply: 24 V DC at 250 mA from the controller
• Electrical durability: 100,000 cycles AC-12 at 240 V, 480 VA resistive
• Mechanical durability: 20,000,000 cycles for relay output
• Minimum load: 10 mA at 5 V DC for relay output
• Switching frequency: 0.1 Hz at maximum load
• Insulation: 1780 V AC between output and internal logic; 500 V AC between input and logic
• Mounting: TH35-15 or TH35-7.5 rail per IEC 60715, or panel with fixing kit
• Dimensions: 90 mm height, 70 mm depth, 110 mm width; net weight 0.359 kg
• Ambient temperature: 0–55 °C operating (horizontal); −25–70 °C storage
• Relative humidity: 10–95 %, without condensation, in operation and storage
• Pollution degree: ≤ 2; operating altitude 0–2000 m; storage altitude 0–3000 m
• Protection: IP20 with protective cover in place
• Shock resistance: 15 gn for 11 ms and 30 gn for 6 ms
• Vibration resistance: 3.5 mm at 5–8.4 Hz and 1 gn at 8.4–150 Hz on rail
• Immunity to microbreaks: 10 ms
• EMC immunity: 8 kV air and 6 kV contact discharge per EN/IEC 61000-4-2
• Field immunity: 10 V/m from 80 MHz to 3 GHz per EN/IEC 61000-4-3
• Burst immunity: 2 kV on power lines and relay output; 1 kV on I/O and serial link
• Surge immunity: 2 kV on AC power lines and relay output; 1 kV on I/O and shielded cable
• Conducted RF immunity: 10 V from 0.15 to 80 MHz per EN/IEC 61000-4-6
• Marking and certifications: CE, CSA, CULus, IACS E10, RCM

Key Performance Highlights

• Fast counting: four 100 kHz inputs handle quadrature and pulse/direction signals for motion tasks.
• Reliable switching: relay outputs deliver 2 A and survive 20 million mechanical cycles.
• Flexible expansion: four modules extend the system to 71 relay outputs when needed.
• Built-in PID: up to 14 simultaneous loops cover temperature and pressure regulation.
• Robust immunity: 8 kV air discharge and 10 V/m field immunity suit harsh cabinets.

Installation Guide

• Mount the TM200C16R on a TH35-15 or TH35-7.5 rail per IEC 60715, or fix it to a panel with the kit.
• Keep at least 50 mm clearance above and below the unit for natural convection cooling.
• Connect the 100–240 V AC supply to the removable 3-terminal screw block.
• Wire inputs with unshielded cable under 50 m, or shielded cable under 10 m for fast and high-speed inputs.
• Route output cable up to 150 m with unshielded wire, and separate it from signal cables.
• Tighten the removable screw terminals for inputs, outputs, serial link and power supply.
• Use the mini B USB 2.0 port for the programming terminal and firmware updates.
• Insert an optional 32 GB micro SD card to store programs and recipes.
• Confirm the PWR and RUN LEDs turn green, and check the ERR LED stays off after power-up.
• Verify state 1 input voltage reaches at least 15 V and state 0 stays below 5 V.

Package List

• 1 × TM200C16R logic controller
• 1 × removable screw terminal block for inputs
• 1 × removable screw terminal block for outputs
• 1 × removable 4-terminal screw block for the serial link
• 1 × removable 3-terminal screw block for the 100–240 V AC supply
• 1 × protective cover for IP20 protection
• 1 × fixing kit for panel mounting
• 1 × quick installation guide

Shipping and Delivery

• We ship worldwide through FedEx, UPS and DHL.
• Orders placed before 15:00 Beijing time leave the warehouse the same working day.
• Express transit takes 3–7 business days depending on destination and customs clearance.
• We pack each controller in its original carton with foam protection and a shock sensor.
• You receive a tracking number by email once the carrier picks up the parcel.

FAQ

• Q: Does the TM200C16R support high-speed counting?
  A: Yes, it provides four 100 kHz inputs with 32-bit counters for HSC mode.
• Q: How many expansion modules can I add?
  A: You can connect up to four modules, reaching 64 transistor or 71 relay outputs.
• Q: Which communication protocols does it support?
  A: It supports Modbus master/slave RTU/ASCII, SoMachine-Network and USB programming.
• Q: What is the relay output rating?
  A: Each relay output handles 2 A, and each common terminal accepts up to 4 A.
• Q: Can I use a micro SD card for program backup?
  A: Yes, the controller accepts an optional 32 GB micro SD card.
• Q: What supply voltage does the controller need?
  A: It runs on 100–240 V AC at 50/60 Hz, with an operating range of 85–264 V.
• Q: How do I request a quotation?
  A: Email sales@ubestplc.com or message +86 86 180 3000 5825 on WhatsApp.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com | +86 86 180 3000 5825