Schneider TM200CE40T M200 Logic Controller: 40 I/O, Ethernet, Transistor Source Outputs

The TM200CE40T belongs to the Easy Modicon M200 range from Schneider Electric. This logic controller runs on 24 V DC supply and delivers 40 discrete I/O points. It combines fast counting, pulse outputs, and Ethernet Modbus TCP/IP communication in one compact housing. Engineers choose the TM200CE40T for machine control, packaging lines, and small process skids. The transistor source outputs switch loads directly and support high-speed PWM/PLS positioning at 100 kHz.

Summary

• The TM200CE40T provides 24 inputs and 16 transistor outputs in a 175 mm wide module.
• Four high-speed inputs reach 100 kHz for single-phase, quadrature, CW/CCW, and pulse/direction counting.
• Two fast outputs run PWM, PLS, or PTO mode at 100 kHz for positioning tasks.
• The built-in Ethernet port supports Modbus TCP/IP client and server operation at 10/100 Mbit/s.
• An adjustable PID regulator handles up to 14 simultaneous loops without extra hardware.
• The controller accepts four I/O expansion modules for relay or transistor output growth.

Technical Specifications

• Brand: Schneider Electric
• Model: TM200CE40T
• Series: Easy Modicon M200
• Product type: Logic controller
• Rated supply voltage: 24 V DC, with operating limits from 20.4 V to 28.8 V
• Discrete I/O: 40 points total, split into 24 inputs and 16 outputs
• Input allocation: I0, I1, I6, I7 high speed; I2 to I5 fast; I8 to I23 regular
• Output allocation: Q0 and Q1 fast output; Q2 to Q15 transistor output
• Input voltage and current: 24 V DC, 7 mA per point, 3.3 kOhm impedance
• Input logic: Sink or source, type 1 per EN/IEC 61131-2
• Output type: Transistor, positive logic (source), 24 V DC, 0.5 A per point
• Output frequency: 100 kHz for PWM/PLS mode at Q0 and Q1
• Response time: 5 µs for high-speed inputs, 1 ms for outputs
• Configurable filtering: 0 ms, 3 ms, or 12 ms per input
• Common current: 2 A or 4 A maximum per output common
• Protection: Overload and short-circuit protection at 2 A, with 1 s automatic reset
• Leakage current: 0.1 mA maximum; voltage drop below 1 V
• Power consumption: 18 W at 24 V DC with maximum I/O load
• Inrush current: 35 A
• Memory: 512 byte internal flash for program backup; optional 32 GB micro SD card
• Battery: BR2032 Li-CFx, 5-year life, 3-year backup at 25 °C
• Execution speed: 0.2 µs per Boolean instruction; 0.3 ms per 1 K instruction
• Event task response: 60 µs
• Clock drift: 90 s per month or less at 25 °C
• Counting inputs: 4 fast inputs at 100 kHz, 32 bits
• Positioning functions: PWM/PLS, 2 channels at 100 kHz
• Regulation loop: Adjustable PID, up to 14 simultaneous loops
• Integrated ports: USB mini B 2.0, serial 1 RS485, serial 2 RS232/RS485, Ethernet RJ45
• Ethernet protocol: Modbus TCP/IP client/server, 10/100BASE-T
• Serial protocols: Modbus master/slave RTU/ASCII or SoMachineNetwork
• Transmission rates: 1.2 to 115.2 kbit/s serial, 12 Mbit/s USB, 10/100 Mbit/s Ethernet
• Isolation: 500 V AC between I/O and internal logic; 500 V DC between supply and logic
• Status LEDs: PWR, RUN, ERR, SD, BAT, SL1, plus per-channel I/O state and link/activity
• Mounting: Top hat rail TH35-15 or TH35-7.5 per IEC 60715, or panel with fixing kit
• Dimensions: 90 mm height, 70 mm depth, 175 mm width
• Net weight: 0.523 kg

Environmental Tolerance and Immunity

• Operating temperature ranges from 0 °C to 55 °C for horizontal installation.
• Storage temperature ranges from -25 °C to 70 °C.
• Relative humidity stays within 10 % to 95 % without condensation.
• Pollution degree stays at 2 or lower; operating altitude reaches 2000 m.
• Protection rating is IP20 with the protective cover in place.
• Electrostatic discharge immunity reaches 8 kV air and 6 kV contact per EN/IEC 61000-4-2.
• Radiated field immunity reaches 10 V/m from 80 MHz to 3 GHz per EN/IEC 61000-4-3.
• Fast transient immunity reaches 2 kV on power lines and 1 kV on I/O per EN/IEC 61000-4-4.
• Surge immunity reaches 1 kV on DC power lines and 1 kV on I/O per EN/IEC 61000-4-5.
• Conducted RF immunity reaches 10 V from 0.15 to 80 MHz per EN/IEC 61000-4-6.
• Shock resistance reaches 15 gn for 11 ms and 30 gn for 6 ms.
• Vibration resistance reaches 3.5 mm at 5 to 8.4 Hz on rail, and 1 gn at 8.4 to 150 Hz.
• The controller rides through 2 ms microbreaks without reset.
• The unit carries CE marking and meets EN/IEC 61131-2 and EN/IEC 61010-2-201.

Installation Guide

• Mount the controller on a TH35-15 or TH35-7.5 rail, or fix it to a panel with the kit.
• Keep at least 50 mm clearance above and below the module for airflow.
• Wire the 24 V DC supply to the 3-terminal removable screw block and respect polarity.
• Use unshielded cable below 50 m for regular inputs and below 150 m for outputs.
• Use shielded cable below 10 m for fast and high-speed inputs to hold signal integrity.
• Connect Ethernet through the RJ45 port with a cable run below 100 m.
• Terminate serial 1 on the 4-terminal block and select RS485 or RS232 mode in software.
• Add up to four expansion modules; transistor configurations support 144 extra outputs.
• Confirm state 1 above 15 V and state 0 below 5 V before you commission the inputs.

Package List

• 1 x Schneider TM200CE40T logic controller
• 1 x set of removable screw terminal blocks for inputs and outputs
• 1 x 3-terminal power supply connector
• 1 x 4-terminal serial link 1 connector
• 1 x protective cover for IP20 protection
• 1 x printed quick start guide

Shipping

• We ship worldwide through FedEx, UPS, and DHL.
• Orders leave the warehouse within 1 to 3 business days after payment clears.
• You receive a tracking number as soon as the carrier scans the parcel.

FAQ

• Q: How many I/O points does the TM200CE40T offer?
  A: It offers 40 discrete points, made up of 24 inputs and 16 transistor outputs.
• Q: Which output type does this model use?
  A: It uses transistor source outputs with positive logic at 24 V DC and 0.5 A per point.
• Q: Can the controller run positioning tasks?
  A: Yes, Q0 and Q1 support PWM, PLS, and PTO mode at 100 kHz.
• Q: Does it support Ethernet communication?
  A: Yes, the RJ45 port runs Modbus TCP/IP client and server at 10/100 Mbit/s.
• Q: How many expansion modules can I add?
  A: You can add four modules, up to 144 extra transistor outputs or 64 relay outputs.
• Q: What is the operating temperature range?
  A: The controller operates from 0 °C to 55 °C in a horizontal installation.

Tree View of Model Information

• Schneider Electric
  • Easy Modicon M200
    • TM200CE40T
      • 40 I/O, 24 V DC, transistor source
      • Ethernet Modbus TCP/IP, USB, 2 serial links

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.

Contact: sales@ubestplc.com | +86 86 180 3000 5825