{"product_id":"schneider-tm200hsc206dt-counter-module-get-quote-today","title":"Schneider TM200HSC206DT Counter Module – Get Quote Today","description":"\u003ch2\u003e\u003cstrong\u003eTM200HSC206DT Counter Module – Modicon M238 Logic Controller by Schneider Electric\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTM200HSC206DT\u003c\/strong\u003e is a high-speed counter module designed for the Modicon M238 logic controller series from Schneider Electric. This module delivers precise counting and positioning functions for demanding industrial automation tasks. Engineers choose the \u003cstrong\u003eTM200HSC206DT\u003c\/strong\u003e for its 60 kHz counting frequency, 31-bit plus sign resolution, and flexible 8-mode configuration. It supports upcounting, downcounting, frequency measurement, period measurement, axis following, and frequency generation. The module connects via two screw terminal blocks and handles 12 discrete inputs and 4 discrete outputs. With 1500 V isolation between channels and internal logic, it ensures reliable operation in electrically noisy environments. The \u003cstrong\u003eTM200HSC206DT\u003c\/strong\u003e belongs to the Modicon M238 range and carries the Schneider Electric brand. This counter module fits directly onto a 35 mm symmetrical DIN rail. It consumes less than 100 mA from the internal 24 V DC and 5 V DC supplies. The external 24 V DC power draw reaches up to 2 A. Each output handles 0.5 A with a total module load current of 2 A. Response time stays under 200 µs for both energisation and de-energisation. Short-circuit and overload protection activate automatically after fault clearance. The fallback status holds each channel at its last value or forces a predefined state of 0 or 1. A faulty channel defaults to 0. The module accepts incremental signal encoders with 15...30 V source outputs and 2- or 3-wire sensors at 24 V. Shielded cable is required for proper signal integrity. The discrete input logic uses positive logic (sink), while outputs use positive logic (source). Input voltage is 24 V DC with guaranteed state 1 at 15...30 V and state 0 at ≤5 V. Input current reaches 5 mA at state 1 and stays ≤0.5 mA at state 0. The local signalling block provides one display for status monitoring. The operating temperature range and environmental tolerances match the Modicon M238 platform requirements. This module resists interference through its 1500 V channel isolation and shielded cable design. Engineers value the \u003cstrong\u003eTM200HSC206DT\u003c\/strong\u003e for axis following and frequency generator applications in packaging, material handling, and motion control systems.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Schneider Electric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e \u003cstrong\u003eTM200HSC206DT\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Modicon M238 logic controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Counter module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounting frequency:\u003c\/strong\u003e 60 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounter resolution:\u003c\/strong\u003e 31 bits + sign\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCounting modes:\u003c\/strong\u003e 8 configurable modes (upcounting, downcounting, frequency meter, period measurement, axis following, frequency generator)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiscrete inputs:\u003c\/strong\u003e 12 EN\/IEC 61131-2 type 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiscrete outputs:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 24 V DC (state 1: 15...30 V, state 0: ≤5 V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput current:\u003c\/strong\u003e 5 mA at state 1, ≤0.5 mA at state 0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput voltage:\u003c\/strong\u003e 24 V DC (19.2...30 V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput current:\u003c\/strong\u003e 0.5 A per output, 2 A per module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResponse time:\u003c\/strong\u003e ≤200 µs energisation\/de-energisation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 1500 V between channels and internal logic for 1 minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort-circuit protection:\u003c\/strong\u003e Automatic reset after fault disappearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverload protection:\u003c\/strong\u003e 0.5...1.5 A trip current with automatic reset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocal signalling:\u003c\/strong\u003e 1 display block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 35 mm symmetrical DIN rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e ≤100 mA at 24 V DC internal, ≤100 mA at 5 V DC internal, ≤2 A at 24 V DC external\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eInstallation Guide\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the module on a 35 mm symmetrical DIN rail inside a control cabinet.\u003c\/li\u003e\n\u003cli\u003eUse shielded cable for all encoder and sensor connections to maintain signal quality.\u003c\/li\u003e\n\u003cli\u003eConnect incremental encoders with 15...30 V source outputs or 2-\/3-wire sensors at 24 V.\u003c\/li\u003e\n\u003cli\u003eWire the two screw terminal blocks according to the Modicon M238 wiring diagram.\u003c\/li\u003e\n\u003cli\u003eVerify the 24 V DC external power supply provides up to 2 A for the module.\u003c\/li\u003e\n\u003cli\u003eConfirm input state 1 at 15...30 V and state 0 at ≤5 V before starting operation.\u003c\/li\u003e\n\u003cli\u003eCheck output loads stay within 0.5 A per output and 2 A total per module.\u003c\/li\u003e\n\u003cli\u003eAllow automatic reset after short-circuit or overload fault clearance.\u003c\/li\u003e\n\u003cli\u003eSet the fallback status per channel to last value or predefined 0\/1 as required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003ePackage List\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × \u003cstrong\u003eTM200HSC206DT\u003c\/strong\u003e counter module\u003c\/li\u003e\n\u003cli\u003e2 × screw terminal blocks\u003c\/li\u003e\n\u003cli\u003e1 × installation leaflet\u003c\/li\u003e\n\u003cli\u003eShipping via FedEx, UPS, or DHL\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the maximum counting frequency of the TM200HSC206DT?\u003c\/strong\u003e The module counts at up to 60 kHz with 31-bit plus sign resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow many counter modules can one TM238 base support?\u003c\/strong\u003e Each TM238 base accepts up to 3 counter modules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich encoders work with this module?\u003c\/strong\u003e Use incremental signal encoders with 15...30 V source outputs or 2-\/3-wire sensors at 24 V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat isolation level does the TM200HSC206DT provide?\u003c\/strong\u003e It offers 1500 V isolation between channels and internal logic for 1 minute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does the module handle overload faults?\u003c\/strong\u003e Overload protection trips at 0.5...1.5 A per output and resets automatically after fault disappearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the output response time?\u003c\/strong\u003e Response time stays ≤200 µs for both energisation and de-energisation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow does the module mount?\u003c\/strong\u003e It clips onto a 35 mm symmetrical DIN rail.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e© 2026 Ubest Automation Limited. \u003ca href=\"https:\/\/www.ubestplc.com\/\"\u003ehttps:\/\/www.ubestplc.com\/\u003c\/a\u003e All rights reserved.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact: \u003ca href=\"mailto:sales@ubestplc.com\"\u003esales@ubestplc.com\u003c\/a\u003e | Phone: \u003ca href=\"https:\/\/wa.me\/868618030005825\"\u003e+86 86 180 3000 5825\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Schneider","offers":[{"title":"Default Title","offer_id":53160664498458,"sku":"TM200HSC206DT","price":257.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0873\/6240\/4634\/files\/TM200CE40R.jpg?v=1792659455","url":"https:\/\/www.ubestplc.com\/products\/schneider-tm200hsc206dt-counter-module-get-quote-today","provider":"Ubest Automation Limited","version":"1.0","type":"link"}