Schneider TSXPSY5520M Power Supply Module – Modicon Premium Platform

The TSXPSY5520M is a power supply module from Schneider Electric for the Modicon Premium automation platform. It takes a 24 to 48 V DC input and delivers 50 W of useful secondary power. The TSXPSY5520M feeds rack backplanes with a stable 5 V and 24 V DC output. It ships with full primary and secondary protection, so your PLC rack keeps running through overloads and short circuits.

Summary

• Delivers 50 W total useful power from a compact double-format module.
• Accepts 19.2 to 60 V DC input for flexible industrial DC bus voltages.
• Protects the rack with primary fuse, overload, overvoltage and short-circuit protection.
• Runs from 0 to 60 °C with IP20 protection and pollution degree 2.
• Carries CE marking and major marine certifications for harsh sites.

Key Selling Points

• Wide input window: 19.2 to 60 V DC covers 24 V and 48 V DC systems with margin.
• Dual output rails: 5 V DC at 7 A and 24 V DC at 0.8 A serve logic and relay loads.
• Strong inrush handling: 15 A inrush at both 24 V and 48 V avoids breaker trips.
• High dielectric strength: 2000 V between primary and earth, and primary and secondary.
• Marine ready: Certifications include DNV, LR, ABS, RINA, GL, BV and RMRS.
• Clear status LEDs: A green OK LED and a red BAT LED show supply and battery state.

Technical Specifications

• Brand: Schneider Electric
• Model: TSXPSY5520M
• Series: Modicon Premium Automation platform
• Product type: Power supply module
• Primary voltage range: 19.2 to 60 V DC, nominal 24 to 48 V DC
• Input current: ≤1500 mA at 48 V, ≤3000 mA at 24 V
• Inrush current: 15 A at 24 V and 15 A at 48 V
• I²t on activation: 50 A²·s at 24 V and 55 A²·s at 48 V
• It on activation: 7 A·s at 24 V and 6 A·s at 48 V
• Total useful secondary power: 50 W
• Secondary power split: 19 W at 24 V DC and 35 W at 5 V DC
• Secondary current: 7 A at 5 V DC and 0.8 A at 24 V DC relay supply
• Primary protection: Internal time-delayed fuse, 5 A, 5 x 20 mm
• Secondary protection: Overload, overvoltage and short-circuit protection
• Insulation resistance: ≥10 mOhm between primary and ground, and primary and secondary
• Dielectric strength: 2000 V primary to earth, 2000 V primary to secondary
• Microbreak immunity: 1 ms
• Module format: Double
• Net weight: 0.89 kg

Operating Range and Environmental Resistance

• Operating temperature: 0 to 60 °C for continuous industrial duty
• Storage temperature: -25 to 70 °C
• Relative humidity: 10 to 95 % without condensation in operation
• Storage humidity: 5 to 95 % without condensation
• Operating altitude: 0 to 2000 m
• Protective treatment: TC coating for tough plant conditions
• Protection degree: IP20 with pollution degree 2
• Dielectric strength: 2000 V isolation resists spikes on harsh DC buses

Standards and Certifications

• CE marking covers the 73/23/EEC, 89/336/EEC, 92/31/EEC, 93/68/EEC directives.
• UL 508 and CSA C22.2 No 142 support industrial control panel use.
• CSA C22.2 No 213 Class I Division 2 covers Groups A, B, C and D.
• IEC 61131-2 confirms programmable controller compatibility.
• Marine approvals include RMRS, DNV, LR, ABS, RINA, GL and BV.

Installation Guide

• Mount the module in a Modicon Premium rack slot with double format space.
• Wire the DC input to the primary terminals and check polarity first.
• Keep input cable short to limit voltage drop at 3000 mA draw.
• Confirm the green OK LED lights after power up.
• Check the red BAT LED to spot battery faults early.
• Leave airflow space around the module because it dissipates heat.
• Tighten terminal screws to the torque in the rack manual.

Package Contents

• 1 x Schneider Modicon TSXPSY5520M power supply module
• 1 x Internal 5 A time-delayed primary fuse, fitted
• 1 x Installation and wiring documentation

Warranty and Shipping

• Every unit carries a 12-month warranty from Ubest Automation.
• We ship worldwide through FedEx, UPS and DHL.
• Tracking numbers reach you once the carrier scans the parcel.

FAQ

• Q: What input voltage range does the TSXPSY5520M accept?
  A: It accepts 19.2 to 60 V DC, covering nominal 24 V and 48 V DC systems.
• Q: How much power does the module deliver to the rack?
  A: It delivers 50 W total, split as 35 W at 5 V and 19 W at 24 V.
• Q: Which faults does the secondary circuit protect against?
  A: It guards against overload, overvoltage and short circuit on the secondary side.
• Q: What does the red BAT LED indicate?
  A: It signals a battery fault, so maintenance staff can replace the battery early.
• Q: Does the module suit marine and hazardous locations?
  A: Yes, it holds DNV, LR, ABS, RINA, GL, BV and RMRS approvals plus Class I Division 2 ratings.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.

Contact: sales@ubestplc.com | +86 86 180 3000 5825