Schneider Electric TSXSAY1000 AS-Interface Master Module – V2, Modicon Premium

The TSXSAY1000 from Schneider Electric is an AS-Interface master module for the Modicon Premium automation platform. It supports AS-i version V2 with standard and extended addressing. Engineers use it to connect sensors, actuators and safety interfaces over one AS-Interface cable. The module fits directly into the host rack and needs no external power supply.

Summary

• The TSXSAY1000 connects up to 31 AS-i slaves with standard or extended addressing.
• It supports discrete I/O, analog I/O and safety interfaces on one AS-Interface bus.
• The M2E profile covers both standard and extended AS-i communication modes.
• The Modicon Premium platform hosts up to 8 modules per rack, depending on the CPU.
• Compact 0.34 kg design and IP20 protection suit panel-mounted machine control.

Key Technical Parameters

• Brand: Schneider Electric
• Model: TSXSAY1000
• Series: Modicon Premium Automation platform
• Product type: AS-Interface master module, V2, standard and extended addressing
• AS-i profile: M2E actuator sensor interface profile
• AS-i version: V2
• Slave capacity: 31 slaves with standard addressing; 31 slaves with extended addressing
• Connectable interfaces: discrete I/O (4I/4O) standard; discrete I/O (4I/3O) extended; analog I/O standard; safety interfaces standard
• Electrical connection: 1 male SUB-D 3-way connector
• Supply: via power supply integrated into the host platform
• Current consumption: 450 mA at 5 V DC
• Local signalling: display unit on the front panel
• Isolation: bus and internal logic stay separated inside the rack
• Data refresh: AS-i cycle updates all slaves in a fixed, deterministic period
• Diagnostics: front display reports slave faults, bus errors and module status
• Hot swap: module supports replacement without full rack shutdown when the CPU allows
• Weight: 0.34 kg
• Operating temperature: 0...60 °C
• Storage temperature: -25...70 °C
• Protection degree: IP20
• Standards: IEC 60068-2-27 Ea shock tests, IEC 60068-2-6 Fc vibration tests

Modules per Base Controller

• 1 module for TSX570
• 1 module for TSX57C
• 2 modules for TSX571
• 4 modules for TSX572
• 8 modules for TSX573
• 8 modules for TSX574
• 8 modules for TSX575
• 8 modules for TSX576

Product Highlights

• One cable carries power and data to all AS-i slaves, which cuts wiring cost.
• Extended addressing doubles the usable address range for larger sensor networks.
• Safety interfaces run on the same bus, so standard and safety devices share one network.
• Front display shows bus status fast, so technicians find faults without a laptop.
• The module draws only 450 mA at 5 V DC from the host rack supply.

Installation Guide

• Insert the module into a free slot of the Modicon Premium rack.
• Tighten the front screw to lock the module in place.
• Plug the AS-Interface cable into the SUB-D 3-way male connector.
• Check the front display for power and bus status after startup.
• Assign slave addresses with the AS-i addressing tool before normal operation.
• Keep the cabinet temperature between 0 °C and 60 °C during operation.
• Verify the rack CPU supports the required number of modules before you install them.

Package Contents

• 1 × Schneider Electric TSXSAY1000 AS-Interface master module
• 1 × protective packaging for international transport

Shipping

• We ship through FedEx, UPS and DHL.
• Each module travels in shock-resistant packaging for safe delivery.
• Contact us for lead time and freight options on bulk orders.

FAQ

• Q: How many slaves can one TSXSAY1000 manage?
  A: It manages 31 slaves with standard addressing and 31 slaves with extended addressing.
• Q: Does the module need a separate power supply?
  A: No. It draws power from the host platform rack and consumes 450 mA at 5 V DC.
• Q: Can I mix safety devices and standard sensors on the same bus?
  A: Yes. The module supports safety interfaces and standard interfaces on the same AS-i network.
• Q: How many modules can I install in one rack?
  A: The number depends on the CPU, from 1 module for TSX570 up to 8 modules for TSX576.
• Q: What connector does the AS-i cable use?
  A: The module uses one male SUB-D 3-way connector for the AS-Interface cable.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com 电话 +86 86 180 3000 5825