Siemens 6ES7467-5GJ02-0AB0 IM 467 | PROFIBUS
UBEST – Trusted Global Automation Parts Supplier
We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.
Siemens 6ES7467-5GJ02-0AB0 - High-Speed PROFIBUS DP Master Interface Module
Connect your S7-400 PLC to the world of field devices with the Siemens 6ES7467-5GJ02-0AB0 IM 467. This powerful interface module turns your central controller into a PROFIBUS DP Master, enabling fast and deterministic communication with up to 96 distributed slaves like remote I/O, drives, valves, and sensors across a single RS485 network at speeds up to 12 Mbit/s.
Complete Technical Specifications
Brand & Series: Siemens SIMATIC S7-400
Full Model Number: 6ES7467-5GJ02-0AB0 (Interface Module IM 467 FO)
Module Type: PROFIBUS DP Master Interface Module
Interface: 1 x RS485 (9-pin Sub-D socket)
Protocol: PROFIBUS DP (EN 50170), Master (Class 1)
Max Transmission Rate: 12 Mbit/s
Max Number of Slaves: 96
Max Number of Connections: 32 (depends on CPU type)
Advanced Services: Equidistance (Isochrone Mode), Direct Data Exchange (DX)
Power Supply: From backplane (5V DC, max 1300 mA) and 24V DC
Operating Temperature: 0°C to +60°C
Max Installation Altitude: 3000 m
Dimensions (W x H x D): 25 mm x 290 mm x 210 mm
Weight: Approximately 700 g
Installation & Compatibility Guide
Install the 6ES7467-5GJ02-0AB0 IM 467 module into a free slot in your S7-400 central rack. Connect the PROFIBUS DP network cable to its 9-pin Sub-D port. Using Siemens STEP 7 hardware configuration, set the station address and configure the connected DP slaves (like ET 200M, drives, etc.). The module will then autonomously manage cyclic data exchange with all configured slaves, mapping their I/O directly into the CPU's process image.
Package Contents & Warranty
What's Included: 1 x Siemens IM 467 PROFIBUS DP Master Module (6ES7467-5GJ02-0AB0).
Our Guarantee: This product is covered by a full 12-month warranty.
Fast Global Shipping
We ensure prompt delivery worldwide via FedEx, UPS, and DHL.
Frequently Asked Questions (FAQ)
What is the difference between a DP Master and a DP Slave?
A DP Master (like this module) actively controls the network, cyclically requesting data from slaves. A DP Slave (like a remote I/O station) is a passive device that only responds to requests from the master.
Can I connect non-Siemens devices to this PROFIBUS network?
Yes. The PROFIBUS DP standard is vendor-neutral. You can connect any device that has a PROFIBUS DP slave interface and a corresponding GSD (device description) file for configuration in STEP 7.
What is "equidistance" or isochronous mode?
This is an advanced feature that synchronizes the data exchange cycle of all slaves on the bus with the cycle of the master controller. This minimizes jitter and is critical for applications requiring very precise, time-synchronized control, such as motion control.
How many of these modules can I install?
You can install up to 10 interface modules (of any type, including CPs) in the central rack, depending on the capabilities of your specific S7-400 CPU.
Do I need a separate terminating resistor?
Yes. A PROFIBUS DP network requires a terminating resistor at both physical ends of the bus cable. The IM 467 module may have a built-in switch to enable its internal terminator if it is at one end of the network. Always check and set the terminators correctly.
© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825