Siemens 6AR1303-0ED00-0AA0: Bridging Fieldbus and Ethernet Networks

Integrate your automation layers seamlessly with the Siemens 6AR1303-0ED00-0AA0 communication module. This versatile interface provides both PROFIBUS DP and standard Ethernet connectivity in one compact unit. It enables robust data exchange between field-level devices and supervisory systems, perfect for network gateway and controller communication tasks.

Dual-Network Connectivity Features

• PROFIBUS DP Master/Slave: Operates at speeds up to 12 Mbit/s for fast fieldbus communication.
• Standard Industrial Ethernet: Features a 10/100 Mbit/s auto-negotiating port with Auto-MDI/MDIX for easy cabling.
• Low Power Design: Consumes a maximum of 2 Watts from a standard 24V DC supply.
• Robust Environmental Rating: Functions reliably across a wide -20°C to +60°C temperature range.
• Integrated Diagnostics: LED status indicators provide clear visual feedback for both network interfaces.

Complete Technical Specifications

• Product Family: Siemens SIMATIC (I/O Module Series)
• Order Number: 6AR1303-0ED00-0AA0
• Module Type: Communication Interface Module
• Interface 1 - PROFIBUS DP:
  • Role: Master or Slave configurable.
  • Standard: EN 50170 (PROFIBUS).
  • Transmission Rate: 9.6 kbit/s to 12 Mbit/s (auto-detect).
  • Connector: 9-pin Sub-D (RS-485).
  • Isolation: Yes, between bus and module logic.
• Interface 2 - Ethernet:
  • Protocol: IEEE 802.3u (100Base-TX), 802.3 (10Base-T).
  • Speed: 10/100 Mbit/s, auto-negotiation.
  • Duplex: Full/Half, auto-negotiation.
  • Connector: RJ45 (8P8C).
  • Crossover: Auto-MDI/MDIX supported.
• Power Supply: 24 V DC (nominal), 19.2 - 28.8 V DC range.
• Current Consumption: Typical 80 mA @ 24V DC.
• Power Consumption: ≤ 2 W.
• Electrical Isolation: Yes, 500 V AC (test voltage) between all ports and backplane.
• Operating Temperature: -20°C to +60°C
• Storage Temperature: -40°C to +70°C
• Relative Humidity: 10% to 95%, non-condensing.
• Dimensions (WxHxD): Approx. 40 mm x 125 mm x 75 mm (varies by housing).
• Installation: Compact, plug-in modular design for DIN rail or panel mounting.
• LED Indicators: For power, PROFIBUS status (BF, SF), Ethernet link/activity, and diagnostics.

Package Contents

• One (1) Siemens Communication Module (6AR1303-0ED00-0AA0).
• Factory packaging including necessary mounting accessories (if applicable).
• Note: Communication cables (PROFIBUS, Ethernet) are sold separately.

Warranty & Support

• This module is protected by a standard 12-month warranty from the shipment date.
• The warranty covers defects in materials and workmanship under normal operating conditions.
• Our technical team can assist with basic configuration and network setup guidance.

Shipping & Handling

• We ship globally using major express carriers: FedEx, UPS, and DHL.
• The module is secured in protective, anti-static packaging to ensure safe delivery.
• A tracking link is emailed to you as soon as the shipment is processed.

Application & Configuration FAQs

What are the primary use cases for this dual-interface module?

The 6AR1303-0ED00-0AA0 is ideal as a protocol converter or network coupler. Common uses include connecting a PROFIBUS DP network to a plant-wide Ethernet system for SCADA access, or allowing an Ethernet-capable controller to act as a master on a legacy PROFIBUS network.

Can this module be used to connect two separate PROFIBUS networks together?

No, it is not a PROFIBUS-to-PROFIBUS router or repeater. It has one PROFIBUS DP port. Its function is to bridge data between the PROFIBUS protocol on one side and Ethernet/IP or S7 communication on the other side.

How is the module's operating mode (Master/Slave/Gateway) configured?

Configuration typically requires dedicated software (like Siemens SIMATIC Manager or a specific configuration tool). You set the mode via parameters downloaded to the module, defining its role on the PROFIBUS network and its Ethernet communication settings (IP address, etc.).

What type of Ethernet protocols does it support over the RJ45 port?

It primarily supports Siemens S7 communication (for PLC-to-PLC data exchange) and open TCP/IP or UDP communication for connection to SCADA or MES systems. Support for specific industrial protocols like PROFINET IO is not standard on this module.

What is a common installation mistake with the PROFIBUS DP connection?

Neglecting proper network termination and cable shielding. You must activate the terminating resistor at both ends of the PROFIBUS segment (usually via switches on the connectors). Also, always ground the cable shield at one end only to prevent ground loops, which cause communication errors.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825