TCSESM083F2CU0 ConneXium Managed Switch Quote

In stock
Manufacturer:
Schneider
Product No.:
TCSESM083F2CU0
Condition:
In Stock
Product Type:
EtherNet TCP/IP Module
Product Origin:
FR
Weight:
520g
Shipping port:
Xiamen
Warranty:
12 months

UBEST – Trusted Global Automation Parts Supplier

We offer a wide range of in-stock industrial automation spare parts. All products come with a 12-month warranty and a 30-day refund for quality issues.

About Us | Contact

Schneider Electric TCSESM083F2CU0 | ConneXium Managed Ethernet Switch

The TCSESM083F2CU0 is a managed Ethernet switch from Schneider Electric. It belongs to the ConneXium series. It offers 6 copper ports and 2 multimode fiber ports. The switch supports ring redundancy and full network management. It fits factory networks that need stable data flow and long fiber runs. Engineers use it for control-level networking in plants and substations.

Summary

  • Managed switch with 6 x RJ45 copper and 2 x SC duplex fiber ports.
  • Supports Ethernet TCP/IP, SNMP, LLDP, and MRP.
  • Uses HiPER ring and RSTP for fast network recovery.
  • Fiber distance reaches 4 km on 62.5/125 µm and 5 km on 50/125 µm.
  • Switching capacity is 5.6 Gbps with an 8K MAC table.

Technical Data

Network Specifications

  • Brand: Schneider Electric
  • Model: TCSESM083F2CU0
  • Series: ConneXium
  • Product type: Ethernet TCP/IP managed switch
  • Managed or unmanaged: Managed
  • Ports: 6 x RJ45 10/100BASE-TX copper plus 2 x 100BASE-FX multimode fiber (SC duplex)
  • Protocol support: Ethernet TCP/IP, SSH, HTTP, HTTPS, SNMP, RS232, LLDP, Telnet, SNTP, MRP
  • Fiber distance: 4 km (62.5/125 µm), 5 km (50/125 µm)
  • Redundancy: HiPER ring, RSTP
  • Max ring nodes: 50
  • Concept: Transparent Ready
  • Switching capacity: 5.6 Gbps
  • MAC table size: 8K entries
  • Jumbo frame: 9216 bytes

Electrical Data

  • Supply voltage: 9.6-32V DC or 18-30V AC

Environmental Data

  • Operating temperature: Not available
  • Protection rating: IP20

Physical Data

  • Mounting: 35 mm symmetrical DIN rail

Lifecycle

  • Lifecycle: Active, in production within the ConneXium range
  • Last verified: 2026-09

Core Performance Details

  • Measurement range: the switch carries 10/100 Mbps traffic on copper and 100 Mbps on fiber.
  • Frequency response: fast switching keeps control traffic stable on busy lines.
  • Sensitivity: the switch reacts quickly to link loss and ring breaks.
  • Linearity: steady throughput suits steady plant data flow.
  • Resolution: port-level status gives clear link and speed detail.
  • Temperature range: check the cabinet rating, because data is not available here.
  • Environmental tolerance: IP20 suits clean control cabinets.
  • Noise immunity: fiber ports block electrical noise on long runs.

Installation Guide

  • Mount the switch on a 35 mm symmetrical DIN rail.
  • Keep the cabinet clean and dry to protect the IP20 rating.
  • Use shielded copper cable for the RJ45 ports.
  • Use SC duplex multimode fiber for the two fiber ports.
  • Feed the unit with 9.6-32V DC or 18-30V AC.
  • Set the ring mode before you join the network.
  • Label each port to speed up later fault finding.

Packing List

  • 1 x Schneider Electric TCSESM083F2CU0 managed switch
  • 1 x protective carton
  • 1 x order confirmation

Shipping

  • We ship by FedEx, UPS, and DHL.
  • Tracking goes out after dispatch.
  • Delivery time depends on the destination and customs.

FAQ

Q: How many ports does the TCSESM083F2CU0 offer?

  • It offers 6 RJ45 copper ports and 2 multimode fiber ports.
  • The fiber ports use SC duplex connectors.
  • Copper ports run at 10/100BASE-TX.

Q: Which redundancy modes does it support?

  • It supports HiPER ring and RSTP.
  • A single ring can hold up to 50 nodes.
  • Ring recovery keeps plant traffic alive after a cable break.

Q: How far can the fiber links reach?

  • Reach is 4 km on 62.5/125 µm fiber.
  • Reach is 5 km on 50/125 µm fiber.
  • Long fiber runs suit large plants and remote cabinets.

Q: What power supply does it need?

  • It runs on 9.6-32V DC or 18-30V AC.
  • Check polarity before you power the unit.
  • Use a stable supply to avoid link drops.

Q: Is the TCSESM083F2CU0 still in production?

  • Yes, the lifecycle status is Active.
  • It stays in production within the ConneXium range.
  • We last verified this status in 2026-09.

Contact

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.