TM200C16T Schneider Electric Controller M200 — 16 I/O Transistor Source Logic Controller

The TM200C16T from Schneider Electric belongs to the Easy Modicon M200 range of logic controllers. This compact unit delivers 16 discrete I/O with transistor source outputs and a 24 V DC supply. Engineers choose the TM200C16T for fast counting, PWM positioning, and reliable serial communication in small automation cells. The controller combines high-speed inputs, adjustable PID loops, and Modbus connectivity in a 110 mm wide housing.

Summary

• The TM200C16T is a 24 V DC logic controller with 16 discrete I/O points.
• It provides 8 discrete inputs, including 4 high-speed channels rated at 100 kHz.
• It offers 7 transistor source outputs, with 2 fast outputs supporting PWM/PLS/PTO modes.
• The unit supports up to 14 simultaneous PID loops and 4 HSC counting channels at 32 bits.
• It includes USB, RS485, and RS232/RS485 ports for programming and fieldbus tasks.

Key Technical Specifications

• Brand: Schneider Electric
• Model: TM200C16T
• Product Range: Easy Modicon M200 logic controller
• Rated Supply Voltage: 24 V DC, with an operating window of 20.4 to 28.8 V
• Discrete I/O Count: 16 points total, split into 8 inputs and 7 outputs plus common terminals
• Input Configuration: I0, I1, I6, I7 run as high-speed inputs; I2 to I5 run as fast inputs; I8 runs as a regular input
• Input Logic: Sink or source type 1, conforming to EN/IEC 61131-2, with 7 mA input current
• Input Thresholds: State 1 guaranteed at 15 V or above; state 0 guaranteed at 5 V or below; input impedance 3.3 kOhm
• Output Type: Transistor, positive logic source, 24 V DC, 0.5 A per point
• Fast Outputs: Q0 and Q1 support PLS/PWM/PTO modes at 100 kHz
• Response Time: 5 µs turn-on and turn-off for high-speed inputs; 1 ms for standard outputs
• Filtering: Configurable input filtering at 0 ms, 3 ms, or 12 ms
• Protection: Overload and short-circuit protection at 2 A, with 1 s automatic reset
• Leakage Current: 0.1 mA maximum for transistor outputs; voltage drop below 1 V
• Output Common Current: 3.5 A maximum per common terminal at COM 0
• Power Consumption: 15.5 W at 24 V DC with maximum I/O load
• Memory: 512 bytes internal flash for program backup; optional 32 GB micro SD card
• Backup: BR2032 Li-CFx battery with 5-year life and 3-year backup at 25 °C
• Execution Speed: 0.2 µs per Boolean instruction; 0.3 ms per 1 K instruction for event tasks
• Regulation: Adjustable PID regulator supporting up to 14 simultaneous loops
• Positioning: PWM/PLS on 2 channels at 100 kHz
• Counting Modes: Quadrature x1/x2/x4, Pulse/Direction, Single phase, and CW/CCW at 100 kHz
• Clock Drift: 90 s per month or less at 25 °C

Communication and Connectivity

• USB mini B 2.0 port supports programming terminal connection at 12 Mbit/s.
• Serial link 1 uses a removable terminal block with RS485 interface.
• Serial link 2 offers RS232/RS485 or isolated RS485 options through terminal blocks.
• Transmission rates range from 1.2 to 115.2 kbit/s, with 115.2 kbit/s as the default.
• RS485 supports a 15 m bus length; RS232 supports a 3 m bus length.
• Protocols include Modbus master/slave RTU/ASCII and SoMachine-Network.
• Seven LEDs indicate PWR, RUN, ERR, SD, BAT, SL1, and per-channel I/O state.

Environmental and Immunity Performance

• Operating temperature ranges from 0 to 55 °C for horizontal installation.
• Storage temperature ranges from -25 to 70 °C, with 10 to 95 % relative humidity.
• Electrostatic discharge immunity reaches 8 kV air and 6 kV contact per EN/IEC 61000-4-2.
• Radiated field immunity reaches 10 V/m from 80 MHz to 3 GHz per EN/IEC 61000-4-3.
• Fast transient immunity reaches 2 kV on power lines and 1 kV on I/O per EN/IEC 61000-4-4.
• Surge immunity reaches 1 kV on DC power lines and 1 kV on I/O per EN/IEC 61000-4-5.
• Conducted RF immunity reaches 10 V from 0.15 to 80 MHz per EN/IEC 61000-4-6.
• Shock resistance reaches 15 gn for 11 ms and 30 gn for 6 ms.
• Vibration resistance reaches 3.5 mm at 5 to 8.4 Hz and 1 gn at 8.4 to 150 Hz on rail.
• The unit tolerates 2 ms microbreaks and operates at altitudes up to 2000 m.
• Pollution degree stays at 2 or lower, with IP20 protection when the cover is in place.

Installation Guide

• Mount the controller on a TH35-15 or TH35-7.5 top hat rail per IEC 60715.
• Use the fixing kit for plate or panel mounting when rail installation is not possible.
• Connect 24 V DC power to the removable 3-terminal screw block.
• Wire inputs with unshielded cable under 50 m, or shielded cable under 10 m for fast inputs.
• Wire outputs with unshielded cable under 150 m to limit noise coupling.
• Keep 500 V AC insulation clearance between input groups and internal logic.
• Insert the BR2032 battery to maintain program backup during power interruption.
• Install an optional micro SD card for extended data storage up to 32 GB.
• Verify the 35 A inrush current against your upstream protection rating.
• Confirm the 15.5 W load against the panel thermal budget before commissioning.

Package List

• 1 x TM200C16T logic controller unit
• 1 x removable screw terminal block for inputs
• 1 x removable screw terminal block for outputs
• 1 x 3-terminal screw block for 24 V DC supply
• 1 x 4-terminal screw block for serial link 1
• 1 x BR2032 Li-CFx battery
• 1 x protective cover for IP20 protection
• 1 x installation reference sheet

Shipping

• We ship worldwide through FedEx, UPS, and DHL express services.
• Orders dispatch within 1 to 2 business days after payment confirmation.
• Tracking numbers reach your inbox as soon as the carrier scans the parcel.
• Packing weight is approximately 517 g per unit, with a 13.6 x 9 x 11.8 cm carton.

FAQ

• Q: Does the TM200C16T support high-speed counting?
  A: Yes, it offers 4 fast inputs in HSC mode at 100 kHz with 32-bit resolution.
• Q: Can I expand the I/O beyond 16 points?
  A: Yes, you can add up to 4 expansion modules, reaching 135 transistor outputs or 64 relay outputs.
• Q: Which programming software works with this controller?
  A: SoMachine software supports the Easy Modicon M200 range through the USB or serial ports.
• Q: What output mode suits a stepper drive?
  A: Q0 and Q1 provide Pulse/Direction and PTO modes at 100 kHz for stepper control.
• Q: How long does the battery hold the program?
  A: The BR2032 battery keeps backup data for 3 years at 25 °C.
• Q: Does the controller include short-circuit protection?
  A: Yes, each output protects against overload and short circuit at 2 A with automatic reset.

Order Information

• Request a quotation for the TM200C16T through our sales team today.
• We confirm stock, lead time, and freight cost within one business day.
• Combine this controller with expansion modules and accessories in one shipment.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com | +86 86 180 3000 5825