TM200C40R Schneider Electric Logic Controller – 40 I/O Relay Controller for Demanding Automation

The TM200C40R from Schneider Electric belongs to the Easy Modicon M200 range. This logic controller delivers 40 discrete I/O points with 16 relay outputs. Engineers choose the TM200C40R for flexible machine control and reliable relay switching. The design suits panel builders who need fast inputs and robust relay outputs in one compact unit.

Summary

• The TM200C40R combines 24 discrete inputs with 16 relay outputs in a single controller.
• Four high-speed inputs reach 100 kHz for counting and positioning tasks.
• The 100–240 V AC supply suits industrial cabinets without a separate DC bus.
• Four expansion modules extend the system to 128 transistor outputs or 80 relay outputs.
• Dual serial links and a USB port simplify programming and field communication.

Key Technical Specifications

• Brand: Schneider Electric
• Model: TM200C40R
• Range: Easy Modicon M200
• Product type: Logic controller
• Rated supply voltage: 100…240 V AC, 50/60 Hz
• Supply voltage limits: 85…264 V
• Inrush current: 50 A
• Power consumption: 59…69 VA at full I/O load
• Discrete I/O number: 40 total (24 inputs, 16 relay outputs)
• Discrete input voltage: 24 V DC, sink or source type 1 per EN/IEC 61131-2
• Discrete input current: 7 mA per input
• Input impedance: 3.3 kOhm
• Logic thresholds: State 1 ≥ 15 V; State 0 ≤ 5 V
• Fast inputs: I2…I5 with 35 µs turn-on and 100 µs turn-off
• High-speed inputs: I0, I1, I6, I7 with 5 µs response
• Regular inputs: I8…I23 with configurable filtering of 0/3/12 ms
• Relay output type: Normally open, 2 A per output
• Output voltage limits: 30 V DC / 250 V AC
• Maximum current per common: 4 A at COM 0, COM 1, COM 2, COM 3
• Relay response time: 10 ms turn-on and 10 ms turn-off
• Electrical durability: 100,000 cycles at AC-12 240 V / 480 VA resistive
• Mechanical durability: 20,000,000 cycles
• Minimum load: 10 mA at 5 V DC
• Switching frequency: 0.1 Hz at maximum load
• Memory: 512 byte internal flash for program backup
• Data storage: 32 GB micro SD card (optional)
• Battery: BR2032 Li-CFx, 5-year life, 3-year backup at 25 °C
• Execution time: 0.2 µs per Boolean instruction; 0.3 ms per 1 K instructions
• Event task response: 60 µs
• Clock drift: ≤ 90 s/month at 25 °C
• PID regulation: Up to 14 simultaneous loops
• Counting inputs: 4 HSC channels at 100 kHz, 32 bits
• HSC modes: Quadrature x1/x2/x4, Pulse/Direction, Single phase, CW/CCW

Communication and Programming Interfaces

• USB mini B 2.0 port supports the SoMachine-Network protocol for programming.
• Serial link 1 provides an RS485 interface on a removable terminal block.
• Serial link 2 offers RS232/RS485 or isolated RS485 options.
• Baud rates range from 1.2 to 115.2 kbit/s; RS485 reaches 15 m and RS232 reaches 3 m.
• Serial ports run Modbus master/slave RTU/ASCII or SoMachine-Network.
• Seven status LEDs cover PWR, RUN, ERR, SD, BAT, SL1, and per-channel I/O state.

Environmental Immunity and Operating Limits

• Operating temperature ranges from 0…55 °C for horizontal installation.
• Storage temperature ranges from -25…70 °C.
• Relative humidity stays at 10…95 % without condensation.
• Electrostatic discharge immunity reaches 8 kV air and 6 kV contact per EN/IEC 61000-4-2.
• Radiated field immunity reaches 10 V/m from 80 MHz to 3 GHz per EN/IEC 61000-4-3.
• Fast transient immunity reaches 2 kV on power lines and relay outputs per EN/IEC 61000-4-4.
• Surge immunity reaches 2 kV on AC power lines and relay outputs per EN/IEC 61000-4-5.
• Conducted RF immunity reaches 10 V from 0.15 to 80 MHz per EN/IEC 61000-4-6.
• Shock resistance reaches 15 gn for 11 ms and 30 gn for 6 ms.
• Vibration resistance reaches 3.5 mm at 5…8.4 Hz and 1 gn at 8.4…150 Hz on rail.
• Pollution degree stays at 2 or lower; operating altitude reaches 2000 m.
• Protection degree is IP20 with the cover in place.

Mechanical Data and Mounting Guide

• Dimensions measure 175 mm wide, 90 mm high, and 70 mm deep.
• Net weight is 0.504 kg.
• Mount the unit on a TH35-15 top hat rail per IEC 60715.
• Alternatively use a TH35-7.5 plate or panel with the fixing kit.
• Keep unshielded input cable runs below 50 m.
• Keep shielded fast and high-speed input cables below 10 m.
• Keep unshielded output cable runs below 150 m.
• Wire inputs and outputs to removable screw terminal blocks.
• Feed 100–240 V AC power through the 3-terminal removable block.
• The controller supplies 24 V DC at 300 mA to external sensors.

Package Contents

• 1 × Schneider Electric TM200C40R logic controller
• Removable screw terminal blocks for inputs, outputs, serial link, and power
• Product documentation set

Shipping and Delivery

• We ship worldwide by FedEx, UPS, and DHL.
• Orders leave the warehouse within 1–3 business days after payment clears.
• Tracking numbers reach your inbox as soon as the carrier scans the parcel.

FAQ

• Q: How many relay outputs does the TM200C40R provide?
  A: It provides 16 normally open relay outputs rated at 2 A each.
• Q: Can I expand the I/O count?
  A: Yes, you can add up to 4 expansion modules for 80 relay outputs or 128 transistor outputs.
• Q: Which software programs this controller?
  A: SoMachine software connects through the USB mini B port or a serial link.
• Q: Does the controller support high-speed counting?
  A: Yes, four HSC inputs run at 100 kHz with 32-bit resolution.
• Q: What supply voltage does the unit accept?
  A: It accepts 100…240 V AC at 50/60 Hz with limits of 85…264 V.
• Q: How many PID loops can run at once?
  A: The controller handles up to 14 simultaneous PID loops.

© 2026 Ubest Automation Limited. https://www.ubestplc.com/ All rights reserved.
Contact: sales@ubestplc.com | +86 86 180 3000 5825