Short Description

• Interfaces: 1x RS232, 1x Ethernet, 1x POWERLINK (V1/V2), 2x USB, 1x X2X Link
• System Module: Controller

General Information

• B&R ID Code: 0xC3B0
• Cooling: Fanless
• Status Indicators:
  • CPU function
  • Ethernet
  • POWERLINK
  • CompactFlash
  • Battery

Diagnostics

• Battery: Yes, using LED status indicator and software
• CPU Function: Yes, using LED status indicator
• CompactFlash: Yes, using LED status indicator
• Ethernet: Yes, using LED status indicator
• POWERLINK: Yes, using LED status indicator
• Temperature: Yes, using software register

Support

• Controller Redundancy: No
• Storage Health Data Support: Yes
• ACOPOS Support: Yes
• Visual Components Support: Yes

Power Consumption

• Without Interface Module and USB: 9.7 W
• X2X Link Power Supply: 1.42 W
• Internal I/O: 0.6 W
• Additional Power Dissipation by Actuators: Not applicable

Certifications

• CE: Yes
• UKCA: Yes
• ATEX Zone 2: II 3G Ex nA nC IIA T5 Gc
• IP20: Ta (see X20 user's manual)
• FTZÚ 09 ATEX 0083X: Yes
• UL cULus E115267: Industrial control equipment
• HazLoc cCSAus 244665: Process control equipment for hazardous locations, Class I, Division 2, Groups ABCD, T5
• DNV: Temperature: B (0 to 55°C), Humidity: B (up to 100%), Vibration: B (4 g), EMC: B (bridge and open deck)
• CCS: Yes
• LR: ENV1
• KR: Yes
• ABS: Yes
• BV EC33B: Temperature: 5 - 55°C, Vibration: 4 g, EMC: Bridge and open deck
• KC: Yes

CPU and X2X Link Power Supply

• Input Voltage: 24 VDC -15% / +20%
• Input Current: Max. 1.5 A
• Fuse: Integrated, cannot be replaced
• Reverse Polarity Protection: Yes
• X2X Link Power Supply Output:
  • Nominal Output Power: 7 W
  • Parallel Connection: Yes
  • Redundant Operation: Yes

Input I/O Power Supply

• Input Voltage: 24 VDC -15% / +20%
• Fuse: Required line fuse: Max. 10 A, slow-blow

Output I/O Power Supply

• Nominal Output Voltage: 24 VDC
• Permissible Contact Load: 10 A

Power Supply - General Information

• Status Indicators:
  • Overload
  • Operating status
  • Module status
  • RS232 data transfer

Diagnostics

• RS232 Data Transfer: Yes, using LED status indicator
• Module Run/Error: Yes, using LED status indicator and software
• Overload: Yes, using LED status indicator and software

Electrical Isolation

• I/O Supply - I/O Power Supply: No
• CPU/X2X Link Supply - CPU/X2X Link Power Supply: Yes

Controller

• CompactFlash Slot: 1
• Real-Time Clock: Nonvolatile, resolution 1 s, -10 to 10 ppm accuracy at 25°C
• FPU: Yes
• Processor:
  • Type: Atom E680T
  • Clock Frequency: 1.6 GHz
  • L1 Cache:
    • Data Code: 24 kB
    • Program Code: 32 kB
  • L2 Cache: 512 kB
• Integrated I/O Processor: Processes I/O data points in the background
• Modular Interface Slots: 1
• Remanent Variables: Max. 1 MB
• Shortest Task Class Cycle Time: 100 µs
• Typical Instruction Cycle Time: 0.0027 µs

Data Buffering

• Battery Monitoring: Yes
• Lithium Battery: Min. 2 years at 23°C ambient temperature

Standard Memory

• RAM: 512 MB DDR2 SDRAM
• User RAM: 1 MB SRAM

Interfaces

• Interface IF1:
  • Signal: RS232
  • Variant: Connection made using 12-pin terminal block X20TB12
  • Max. Distance: 900 m
  • Transfer Rate: Max. 115.2 kbit/s
• Interface IF2:
  • Signal: Ethernet
  • Variant: 1x RJ45 shielded
  • Line Length: Max. 100 m between 2 stations (segment length)
  • Transfer Rate: 10/100/1000 Mbit/s
  • Physical Layer: 10BASE-T/100BASE-TX/1000BASE-T
  • Half-Duplex: Yes
  • Full-Duplex: Yes
  • Autonegotiation: Yes
  • Auto-MDI/MDIX: Yes
• Interface IF3:
  • Fieldbus: POWERLINK (V1/V2) managing or controlled node
  • Type: Type 4
  • Variant: 1x RJ45 shielded
  • Line Length: Max. 100 m between 2 stations (segment length)
  • Transfer Rate: 100 Mbit/s
  • Physical Layer: 100BASE-TX
  • Half-Duplex: Yes
  • Full-Duplex: POWERLINK mode: No / Ethernet mode: Yes
  • Autonegotiation: Yes
  • Auto-MDI/MDIX: Yes
• Interface IF4:
  • Type: USB 1.1/2.0
  • Variant: Type A
  • Max. Output Current: 0.5 A
• Interface IF5:
  • Type: USB 1.1/2.0
  • Variant: Type A
  • Max. Output Current: 0.5 A
• Interface IF6:
  • Fieldbus: X2X Link master

Electrical Properties

• Electrical Isolation: Ethernet (IF2), POWERLINK (IF3) and X2X (IF6) isolated from each other, from other interfaces and from PLC

Operating Conditions

• Mounting Orientation:
  • Horizontal: Yes
  • Vertical: Yes
• Installation Elevation Above Sea Level:
  • 0 to 2000 m: No limitation
  • >2000 m: Reduction of ambient temperature by 0.5°C per 100 m
• Degree of Protection per EN 60529: IP20

Ambient Conditions

• Temperature:
  • Operation:
    • Horizontal Mounting Orientation: -25 to 60°C
    • Vertical Mounting Orientation: -25 to 50°C
  • Storage: -40 to 85°C
  • Transport: -40 to 85°C
• Relative Humidity:
  • Operation: 5 to 95%, non-condensing
  • Storage: 5 to 95%, non-condensing
  • Transport: 5 to 95%, non-condensing

Mechanical Properties

• Note: Order application memory (CompactFlash) separately
• Backup Battery: Included in delivery
• X20 End Cover Plate (Right): Included in delivery
• 12-Pin X20 Terminal Block: Included in delivery
• Interface Module Slot Covers: Included in delivery

Dimensions

• Width: 150 mm
• Height: 99 mm
• Depth: 85 mm
• Weight: 400 g