Control More with the Schneider Electric TSXDSZ32T2 Relay Output Module

Need to control many devices? This TSXDSZ32T2 module is your solution. It gives you 32 relay outputs in one compact unit. It works with 24 VDC power. Perfect for turning on lights, valves, and small motors in your TSX Micro PLC system. It is built to be safe and reliable.

Why Choose This Module?

• High Density: Control 32 devices from one module, saving space.
• Safe & Protected: Built-in safety against over-voltage and short circuits.
• Easy to Connect: Uses simple screw terminals for reliable wiring.
• Flexible Use: You can pair two outputs together for more power if needed.
• Fast Response: Switches on or off in less than 0.5 milliseconds.

Complete Technical Details

Brand & Model: Schneider Electric TSXDSZ32T2
For Use With: Modicon TSX Micro PLCs
Module Job: Discrete (On/Off) Output Module
Output Type: Relay (Electromechanical)
Number of Outputs: 32
Output Voltage: 24 V DC (Works from 19V to 30V)
Current per Output: 0.5 A (Up to 0.625 A max)
Short-Circuit Protection: Yes, Thermal Breaker & Current Limiter
Over-Voltage Protection: Yes, with Zener Diode
Leakage Current: Very low, max 0.5 mA when off
Switching Speed: Very fast, under 0.5 ms
Power Use: 94 mA from PLC backplane
Heat Output: 3.2 Watts for the whole module
Isolation: High, 1500V for safety
Connection: Screw Terminal Block
Operating Temp: 0°C to 60°C
Weight: Approximately 0.42 kg

How to Install It

1. Turn off all power to your PLC system.
2. Snap the module onto the DIN rail in your TSX rack.
3. Connect your 24V DC power supply to the correct terminals.
4. Wire your devices (like solenoids or indicators) to the 32 output screws.
5. Do not exceed 0.5A per output. You can combine two outputs for 1A if your load needs it.
6. Turn power on. The module is ready to be controlled by your PLC program.

Common Questions (FAQ)

What can I connect to this output module?
You can connect any 24V DC device that uses less than 0.5A, such as pilot lights, small relays, solenoid valves, or alarm buzzers. Check your device's current rating first.

How do I protect the module from wiring mistakes?
The module has its own short-circuit and over-voltage protection. However, always use a properly sized fuse on the main 24V DC supply line for an extra layer of safety.

Can I use it to control AC voltage?
No. The TSXDSZ32T2 outputs are for 24V DC only. To control AC devices, you would need to connect these outputs to an intermediate relay rated for AC power.

Why is there a maximum leakage current listed?
Even when turned "OFF," a tiny amount of current might leak through. This 0.5mA maximum is so low that it won't accidentally turn on sensitive devices connected to it.

The load needs more than 0.5A, what are my options?
You can parallel two adjacent outputs as per the manual, doubling the current to 1A. For larger loads, use this module to control a larger external relay or contactor.

What You Get & Our Promise

Your order includes one Schneider Electric TSXDSZ32T2 output module. We back it with a full 12-month warranty. If there is a problem with materials or workmanship within a year of purchase, we will replace it.

Fast Shipping Options

We deliver quickly and reliably. Choose from trusted carriers: FedEx, UPS, or DHL at checkout.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825