Bently Nevada 3300 NSv Vibration Probe 330904-08-10-05-02-00
UBEST – dôveryhodný globálny dodávateľ náhradných dielov pre automatizáciu
Ponúkame široký sortiment skladových náhradných dielov pre priemyselnú automatizáciu. Všetky produkty majú 12-mesačnú záruku a 30-dňovú možnosť vrátenia peňazí pri problémoch s kvalitou.
Bently Nevada 3300 NSv Standard Vibration Probe
This new and original 330904-08-10-05-02-00 industrial vibration probe is ideal for general machinery monitoring. It comes in factory packaging with complete 12-month coverage. We ship worldwide via FedEx, UPS, and DHL.
Model Number Configuration
- 330904: 3300 NSv Probe with M8x1 thread and armor
- 08: 80 mm unthreaded probe section
- 10: 100 mm total case length
- 05: 0.5 meter cable length (20 inches)
- 02: ClickLoc connector with standard cable
- 00: Standard industrial version
Technical Specifications
- Brand: Bently Nevada
- Model: 3300 NSv
- Linear Range: 1.5 mm (60 mils)
- Output Voltage: -1 to -13 Vdc
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Accuracy: Better than ±0.06 mm (±2.3 mils)
- Frequency Response: 0 to 10,000 Hz
- Probe Resistance: 4.0 ± 0.5 ohms
- Operating Temperature: -52°C to +177°C
- Case Material: 304 Stainless Steel
- Tip Material: Chemical-resistant PPS
- Cable Type: 75 ohm coaxial with FEP insulation
- Connector: Miniature coaxial ClickLoc
- Thread Type: M8x1 metric thread
- Minimum Target: 13 mm diameter recommended
- Maximum Wiring: 305 meters (1000 feet)
Installation Guide
- Set measurement gap to 1.0 mm (40 mils)
- Hand tighten only - maximum 0.56 N•m (5 in•lb)
- Maintain minimum 25.4 mm (1.0 in) cable bend radius
- Use proper thread engagement (12 mm minimum)
- Ensure target surface is clean and properly sized
System Compatibility
This 3300 NSv probe works with all Bently Nevada 3300 monitoring systems. It replaces older 3300 RAM probes directly without modification.
Package Contents & Warranty
- One genuine Bently Nevada 3300 NSv proximity probe
- Standard cable with ClickLoc connector
- Original factory packaging with documentation
- Full 12-month defect protection
Expert FAQs
- What is the main advantage over 3300 RAM probes? This NSv version offers significantly improved chemical resistance for longer service life.
- Can I use this probe for axial position measurement? Yes, but for shafts under 13mm, reduce the gap to maintain accuracy.
- What cable length options are available? Besides 0.5m, this probe comes in 1m, 5m, and 7m cable lengths.
- Is the connector waterproof? The ClickLoc connector provides environmental protection but is not designed for submersion.
- How does temperature affect performance? The probe maintains stable operation across its full -52°C to +177°C range.
Need detailed installation instructions? Download the complete technical manual here for installation guidelines and performance data.