GE IS200EROCH1A EX2100 Regulator Options Card | 24-Channel
UBEST – dôveryhodný globálny dodávateľ náhradných dielov pre automatizáciu
Ponúkame široký sortiment skladových náhradných dielov pre priemyselnú automatizáciu. Všetky produkty majú 12-mesačnú záruku a 30-dňovú možnosť vrátenia peňazí pri problémoch s kvalitou.
GE IS200EROCH1A Exciter Regulator Options Card
The IS200EROCH1A is a vital Exciter Regulator Options Card for GE EX2100 systems. This IS200EROCH1A card adds key functions like ground detection and keypad support. It fits in one backplane slot and works in both simplex and redundant setups. A green power LED shows it is on.
Why Choose This Card?
- Adds 24 channels for more control options.
- Provides power for contact outputs (70 V DC).
- Connects keypads and tools for easy setup.
- Works with GE and third-party ground detectors.
- Fits in EX2100 regulator racks perfectly.
Technical Specifications
Brand: General Electric
Model: IS200EROCH1A
Series: EX2100 Excitation
Product Type: Exciter Regulator Options Card
Channels: 24
Operating Temperature: 0°C to +45°C
Board Size: 15.9 cm x 17.8 cm
Output Power (ECTB): +70 V DC
Tool Interface: RS-232C (9-pin)
Baud Rate: 1200 to 38.4 K
Backplane Connectors: 2
Capacitors: 4 High-Voltage Electrolytic
Compatibility: IS200ERBP, IS200ERRB Backplanes
Installation & Use
This card slides into one slot on the ERBP or ERRB backplane. Connect a keypad to the front or back connector. Use the tool port to link a computer. It provides power to the ECTB board. The green LED lights up when powered.
Warranty & Shipping
We offer a full 12-month warranty for quality assurance. We ship quickly worldwide via FedEx, UPS, and DHL.
Frequently Asked Questions
What is the main job of this card?
It provides extra regulator functions like ground detection, keypad support, and power for other boards.
Where does this card install?
It fits into a single slot on the Exciter Regulator Backplane (ERBP) or the Redundant Backplane (ERRB).
Can I connect two keypads at once?
No, only one keypad can be connected at a time, either on the front faceplate or the backplane.
What power does it supply to the ECTB?
It supplies positive 70 V DC power to the contact output section of the ECTB board.
How do I know if the card has power?
A green LED on the card's faceplate will light up when it is receiving power correctly.
© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | +86 180 3000 5825