KEB 09F5B1B-2B0A Combivert Axis Drive: Robust 1.5kW Motor Controller

Power your precision motion. The KEB 09F5B1B-2B0A is a robust 1.5kW axis drive from the Combivert F5 series, designed for reliable motor control in demanding industrial automation environments.

Key Features for Demanding Motion Control

• High Power Density: 1.5 kW output in a compact, medium-load design.
• High Switching Frequency: 16 kHz for smooth, quiet motor operation and precise control.
• Robust Protection: Integrated short-circuit and earth (ground) fault monitoring.
• Strong Overload Capacity: Handles peak currents up to 15.1 Amps.
• Industrial Compliance: Meets EMC Category C1 standards for electromagnetic compatibility.

Complete Technical Specifications

Brand: KEB Automation

Series: Combivert F5 Axis Drive Series

Model: 09F5B1B-2B0A (09.F5.B1B-2B0A)

Rated Output Power: 1.5 kW

Rated Output Current: 7.0 A

Maximum Output Current: 15.1 A

Switching Frequency: 16 kHz

Protection Features: Short-Circuit Monitoring, Earth Fault Monitoring.

Enclosure Rating: IP20 (Protection against solid objects >12.5mm)

EMC Standard: Category C1

Operating Temperature: -10°C to +45°C

Storage Temperature: -25°C to +70°C

Cooling Method: Natural convection or forced air (please refer to manual).

Control Technology: Advanced vector control for high dynamic performance.

Typical Applications: Conveyors, indexing tables, pumps, fans, and general machinery automation.

FAQ – Installation & Performance

What is the benefit of a 16 kHz switching frequency?

It results in smoother motor torque, which reduces audible motor whine (noise) and allows for higher control bandwidth, leading to better positioning accuracy and dynamic response.

What does "EMC Category C1" mean for installation?

It means the drive is designed for use in a residential, commercial, or light-industrial environment. To meet this standard, you must follow the installation guidelines in the manual regarding filters and wiring practices.

Can this drive handle repeated start/stop cycles?

Yes, its high overload capacity (15.1A max) is designed for such demands. However, for very high cyclic duty, ensure adequate cooling and consider the motor's thermal capacity as well.

Is an external brake resistor required?

For applications requiring frequent deceleration or holding a load, an external brake resistor is typically necessary. The drive's internal braking capability is limited; check the manual for sizing.

The IP20 rating is low. Where should it be installed?

IP20 offers basic protection against touch and large objects. It must be installed inside a higher-rated control cabinet (e.g., IP54) to protect it from dust, moisture, and accidental contact.

Package & Service Information

Package Includes: 1 x KEB 09F5B1B-2B0A Combivert F5 Axis Drive Unit.

Warranty: Backed by a standard 12-month manufacturer's warranty.

Shipping: Available for global delivery via FedEx, UPS, and DHL.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825