AI-TEK 70085-1010-137 Compact Speed Sensor - 40V Output
UBEST – Güvenilir Küresel Otomasyon Parçaları Tedarikçisi
Geniş bir stokta endüstriyel otomasyon yedek parça yelpazesi sunuyoruz. Tüm ürünler 12 aylık garanti ve kalite sorunları için 30 günlük iade ile gelir.
AI-TEK Speed Sensor 70085-1010-137: Compact RPM Detection
Meet the versatile AI-TEK 70085-1010-137 speed sensor. This compact unit provides reliable speed measurement with direct wiring connection. Perfect for space-limited applications requiring accurate RPM monitoring.
Main Benefits
- Direct Wire Connection: Easy installation with 24-inch leads
- Compact Design: Short 2.937" length fits tight spaces
- Wide Temperature Range: Works from -55°C to +107°C
- Clear Polarity: White lead indicates positive connection
Technical Specifications
- Product Model: AI-TEK 70085-1010-137
- Standard Output: 40V peak-to-peak voltage
- Minimum Output: 3.4V guaranteed signal
- Electrical Resistance: 130 ohms maximum
- Inductance Value: 33 mH typical
- Wire Polarity: White lead positive
- Thread Size: 5/8-18 UNF standard
- Thread Length: 2.937 inches
- Sensor Length: 2.937 inches total
- Connection Type: Direct wire termination
- Wire Length: 24 inches (60.9 cm)
- Wire Type: High-temperature cable
- Wire Gauge: 20 AWG stranded
- Insulation Rating: 300V rated
- Operating Temperature: -55°C to +107°C
- Storage Temperature: -65°C to +125°C
- Housing Material: Stainless steel construction
- Protection Class: IP67 weatherproof
- Frequency Range: 0-12kHz response
- Target Material: Ferrous metals detection
- Air Gap Range: 0.5mm to 1.5mm optimal
- Product Weight: 3 ounces maximum
Expert Questions & Answers
How do I connect this sensor to my system?
Connect the white wire to positive and the other wire to negative or ground in your monitoring system.
What is the advantage of direct wire connection?
Wire leads allow custom cable routing and eliminate the need for separate connectors in permanent installations.
Can this sensor detect very low speeds?
Yes, it generates detectable signals down to very low RPM while maintaining performance at high speeds up to 12kHz.
Is the wire length sufficient for most applications?
The 24-inch lead provides ample length for most installations while allowing custom extension if needed.
How do I ensure proper air gap setting?
Maintain 0.5mm to 1.5mm distance between sensor face and target surface for optimal signal strength.
Quality Assurance
We provide complete 12-month product warranty with full technical support for installation guidance.
Shipping Services
Fast global delivery available through FedEx, UPS, and DHL shipping networks.
Need compact speed sensing solutions? Contact our technical team today!
© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Tel: +86 180 3000 5825