SICK YMHDAC-C30XXXMDSA9 Actuator Adapter Cable

The SICK YMHDAC-C30XXXMDSA9 is a short adapter cable for connecting handheld scanners. This cable interfaces between a scanner's auxiliary port and a controller. It features a compact 0.3-meter (30 cm) length for tidy setups. The YMHDAC-C30XXXMDSA9 includes a built-in voltage converter for power adaptation.

Product Identification & Core Specifications

• Brand: SICK
• Part Number: YMHDAC-C30XXXMDSA9
• Accessory Family: Other Adapters and Cables
• Product Type: Actuator/Adapter Cable with Converter
• Connector A: Male D-Sub, 9-pin
• Connector B: Male D-Sub, 15-pin
• Cable Length: 0.3 meters (300 mm / approx. 12 inches)
• Key Feature: Includes integrated 24V/5V DC Converter
• Primary Application: Adapter for Auxiliary (AUX) Port Connection

Compatibility & Supported Devices

• Compatible Scanners: For handheld scanners to CDB620, CDM420 models
• Also Compatible With: CDF600 and CDF600-2 series handheld scanners
• Connection Purpose: Links scanner AUX port to control interface
• Typical Controller: Connects to compatible SICK control boxes or I/O

Electrical Specifications & Converter Details

• Integrated Converter: 24V DC to 5V DC step-down power converter
• Input Voltage: Accepts standard 24V DC industrial supply
• Output Voltage: Provides regulated 5V DC for scanner interface
• Current Rating: Sufficient for powering scanner AUX functions
• Signal Lines: Carries data/control signals between connectors
• Cable Type: Multi-conductor, shielded for signal integrity

Package Contents (Items Supplied)

• Adapter Cable: 1 x YMHDAC-C30XXXMDSA9 Cable Assembly
• Power Converter: 1 x Integrated 24V/5V DC Converter in-line
• Documentation: May include basic connection leaflet
• Packaging: Protective plastic bag or small box

Installation & Connection Guide

• Identify the AUX port on your SICK handheld scanner (e.g., CDB620).
• Connect the 9-pin male D-Sub connector of the cable to this scanner port.
• Route the short 30cm cable to your control interface or junction point.
• Connect the 15-pin male D-Sub connector to the corresponding controller port.
• Ensure the in-line converter is accessible and not subjected to stress.
• Provide a clean 24V DC power source to the designated wires on the 15-pin side.
• Secure the cable to avoid strain on the connectors during operation.

Shipping & Logistics Information

• Shipping Units: Sold as individual units
• Global Carriers: Shipped via FedEx, UPS, or DHL
• Delivery Time: Dependent on destination and service level
• Package Safety: Packaged to prevent damage during transit

Certifications & Warranty

• Product Certifications: EU Declaration of Conformity, UK Declaration of Conformity, China RoHS
• Warranty Duration: 12-month warranty from the purchase date
• The warranty covers defects in materials, workmanship, and the integrated converter.
• Proper use within specified electrical limits is required for warranty validity.

Frequently Asked Questions (FAQ)

• What is the main purpose of the built-in voltage converter?

The converter steps down the standard 24V DC control voltage from the factory floor to the 5V DC logic level required by the scanner's AUX port electronics, ensuring safe and correct operation.

• Can I use this cable to extend the scanner's main communication cable?

No, this is not an extension cable. It is a specific adapter for the AUX (auxiliary) port, which is used for connecting external triggers, lights, or other control signals, not the primary data communication.

• Is this cable compatible with the CLV series of scanners?

This cable is specifically listed for CDB, CDM, and CDF series handheld scanners. Using it with a CLV or other unlisted series may not work and could risk damaging the device. Always check the scanner manual.

• What happens if I connect the 24V power to the wrong pins?

Incorrect wiring can destroy the integrated converter and potentially damage the expensive handheld scanner. Always follow the official pinout diagram from the SICK scanner's installation manual.

• The cable is only 30cm long. Can I get a longer version?

This part number specifies a 30cm length. For longer runs, you typically need to mount the controller closer to the scanner's dock or consult SICK for alternative interface solutions, as extending this cable is not advised.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com Phone: +86 180 3000 5825