Mitsubishi MR-J3ENSCBL30M-H Encoder Cable: 30m High-Flex IP67 Link

Withstand motion and harsh environments. The Mitsubishi MR-J3ENSCBL30M-H is a 30-meter encoder cable built with high-flex construction and IP67 protection for dynamic, demanding applications.

Key Features for Dynamic & Demanding Setups

• High-Flex Design: Built for repeated bending in cable carriers or moving machinery.
• Long, Protected Run: 30-meter length with full IP67 rating at connectors.
• Wide Motor Compatibility: Works with HF-KP, HF-MP, HF-SP, HF-JP, HC-LP, HC-UP series.
• Durable Construction: Engineered for a high bending life expectancy.
• Broad Temperature Tolerance: Operates from 0°C to 55°C, stores from -20°C to 75°C.

Complete Technical Specifications

Brand: Mitsubishi Electric

Series: MELSERVO-J3 Series

Model: MR-J3ENSCBL30M-H

Part Number: MR-J3ENSCBL30M-H

Cable Type: High-Flex Encoder Feedback Cable

Length: 30 Meters

Protection Rating: IP67 (Dust-tight and protected against temporary immersion)

Flexibility Rating: High Flex (Suitable for cable carriers / drag chains)

Bending Life: High (Designed for continuous flexing applications)

Compatible Motor Series: HF-KP, HF-MP, HF-SP, HF-JP, HC-LP, HC-UP

Operating Temperature: 0°C to +55°C

Storage Temperature: -20°C to +75°C

Logistics Class: Class A (High-quality standard)

Weight: Approximately 3.63 kg (8.00 lbs)

Shielding: Yes, for EMI protection in dynamic environments.

FAQ – High-Flex & Long-Distance Installation

What does "High Flex" specifically mean for installation?

It means the cable is designed to be used inside cable carriers (drag chains) for continuous back-and-forth movement. Do not use a standard flex cable for this purpose, as it will fail quickly.

How do I maintain the IP67 seal in a moving cable carrier?

Use strain relief clamps at both ends of the carrier to secure the cable and prevent pulling on the connectors. Ensure the cable is properly clipped inside the carrier to avoid pinching.

Is there a minimum bend radius for this high-flex cable?

Yes. Even high-flex cables have a minimum bend radius, typically 10-15 times the cable diameter. Exceeding this radius during installation or in the carrier will damage the internal wires.

Can I use this 30m cable for a very short, high-flex application?

It's not ideal. The excess cable must be managed carefully—never coil it tightly in the carrier. For short runs, it's better to order a custom length or carefully loop the excess in a dedicated, large-radius cable management area.

The cable is compatible with many motor series. How do I confirm the connector fits?

The part number MR-J3ENSCBL30M-H specifies the connector type. Match this suffix to your specific motor and drive model in the Mitsubishi catalog to ensure pin-to-pin compatibility.

Package & Service Information

Package Includes: 1 x Mitsubishi MR-J3ENSCBL30M-H High-Flex Encoder Cable (30 meters).

Warranty: Covered by a 12-month warranty against defects.

Shipping: Safely packed and shipped worldwide via FedEx, UPS, and DHL.

© 2025 Ubest Automation Limited. All rights reserved.
Original Source: https://www.ubestplc.com/
Contact: sales@ubestplc.com | Phone: +86 180 3000 5825